Schneider ATV12H075M3 Variable Frequency Drive
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8615305023276 | |||||||
| +8615305023276 | ||||||||
| 15305023276 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Schneider Electric |
| Product Series | Altivar 12 |
| Model | ATV12H075M3 |
| Product Type | Variable Frequency Drive (VFD) |
| Application | Simple machine and asynchronous motor control |
| Rated Motor Power | 0.75 kW / 1 HP |
| Rated Supply Voltage | 200–240 V AC |
| Supply Phase | 3-phase |
| Supply Frequency | 50/60 Hz |
| Output Voltage | 200–240 V AC, 3-phase |
| Nominal Output Current | 4.2 A |
| Maximum Transient Current | 6.3 A for 60 seconds |
| Output Frequency Range | 0.5–400 Hz |
| Motor Control | Sensorless flux vector control with PWM |
| Communication Protocol | Modbus |
| Communication Interface | 2-wire RS-485 |
| Communication Connector | RJ45 |
| Analog Inputs | 1 |
| Analog Outputs | 1 |
| Digital Inputs | 4 |
| Digital Outputs | 2 |
| Relay Output | 1 |
| Analog Input Signal | 0–5 V, 0–10 V or 0–20 mA |
| Internal Logic Supply | 24 V DC |
| EMC Filter | No integrated EMC filter |
| Protection Rating | IP20 |
| Mounting | Cabinet mounting |
| Cooling Method | Heat sink cooling |
| Switching Frequency | 4–16 kHz |
| Braking Function | DC injection braking |
| Motor Protection | Electronic thermal protection |
| Protection Functions | Overcurrent, overheating, short circuit, phase loss, undervoltage and overvoltage |
| Operating Position | Vertical ±10° |
| Operating Temperature | -10 to +40 °C |
| Maximum Altitude | 3000 m with derating above 1000 m |
| Dimensions | 72 × 143 × 131.2 mm |
| Weight | 0.8 kg |
FAQ
1. What is the rated motor power of the Schneider ATV12H075M3?
The ATV12H075M3 is designed for motors with a rated power of 0.75 kW, equivalent to approximately 1 HP. It is suitable for three-phase motors operating within the drive’s 200–240 V class. The nominal output current is 4.2 A, making it appropriate for compact industrial machines and general-purpose motor-control applications.
2. What type of motor can the ATV12H075M3 control?
The ATV12H075M3 is primarily intended for three-phase asynchronous motors. It uses sensorless flux vector control with PWM technology to regulate motor speed and torque without requiring a motor encoder for standard applications.
It can be used for equipment such as conveyors, small pumps, fans, material-handling equipment and other machines requiring variable-speed motor control.
3. What is the input voltage requirement of the ATV12H075M3?
The ATV12H075M3 is designed for a three-phase AC supply in the 200–240 V range, with a nominal supply frequency of 50/60 Hz.
Before installation, the incoming power supply should be checked to ensure that its voltage, phase configuration and frequency are compatible with the drive. Proper circuit protection and grounding should also be provided according to the electrical installation requirements.
4. What communication protocol does the ATV12H075M3 support?
The ATV12H075M3 supports Modbus communication through a 2-wire RS-485 interface. The drive uses an RJ45 communication connector for connection to compatible automation equipment.
Modbus communication can be used to exchange operating commands, speed references, monitoring values, status information and parameter data between the VFD and a PLC or other industrial controller.
5. What is the output frequency range of the ATV12H075M3?
The ATV12H075M3 provides an output frequency range of approximately 0.5–400 Hz. The actual operating frequency should be selected according to the motor nameplate, mechanical load and application requirements.
When operating a standard motor above its rated frequency, additional consideration should be given to motor cooling, mechanical speed limitations, bearing conditions and the permissible operating range of the driven equipment.
6. Does the ATV12H075M3 provide motor protection?
Yes. The ATV12H075M3 incorporates electronic motor thermal protection based on motor current and operating conditions. The drive also provides protective functions for conditions such as overcurrent, overheating, short circuit, input phase loss, undervoltage and overvoltage.
For reliable protection, the motor’s rated parameters should be entered correctly during commissioning. Incorrect motor data can affect the accuracy of motor protection and drive control.
7. How should the ATV12H075M3 be configured before starting the motor?
Before starting the motor, enter the motor nameplate information into the drive, including rated voltage, current, frequency and power. The appropriate motor-control settings, acceleration time, deceleration time and speed reference should then be configured according to the application.
The motor wiring and protective grounding should be checked before energizing the system. During initial commissioning, it is recommended to run the motor at low speed first and verify the rotation direction. Once correct operation has been confirmed, the motor can gradually be brought to the required operating speed and load.
8. What should be checked if the ATV12H075M3 trips during operation?
First identify the active fault code and determine the operating condition when the trip occurred. Check the motor current, supply voltage, acceleration and deceleration settings, motor wiring and mechanical load.
An excessive load, overly short acceleration time, motor wiring problem, incorrect motor parameters, overheating or abnormal supply voltage can cause the drive to enter a protective state.
If the same fault repeatedly appears after resetting the drive, the underlying cause should be investigated before continued operation. Repeatedly resetting the VFD without correcting the source of the fault can increase stress on the drive, motor and mechanical system.
Schneider ATV12H075M3 Variable Frequency Drive is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8615305023276 | |||||||
| +8615305023276 | ||||||||
| 13950166376 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.
