Technical Specifications

FAQ

Q1: What is the Ingersoll Rand 47588564001 / 23561319 Filter Pad?

A: The Ingersoll Rand 47588564001, order number 23561319, is a filter pad used in Ingersoll Rand equipment. It is a flat filter media component designed to capture airborne dust, fibers, and other particulate contaminants, helping prevent unwanted debris from entering the equipment. Unlike a spin-on filter element, a filter pad is generally installed in a designated filter frame or air intake position. When purchasing a replacement, confirm that the required component is a filter pad rather than a complete air filter element or filter assembly.

Q2: What is the main function of the 23561319 Filter Pad?

A: The filter pad provides preliminary air filtration by reducing the amount of dust and particulate matter entering the equipment. In air compressors and other industrial machinery, airborne contaminants can accumulate in cooling passages, electrical compartments, and other areas where clean airflow is important. Using the correct filter pad helps reduce the risk of contamination-related blockage and wear while supporting proper internal ventilation. Actual filtration performance depends on the media construction, airflow rate, and dust concentration in the operating environment.

Q3: Is the 23561319 Filter Pad compatible with all Ingersoll Rand air compressors?

A: Compatibility should not be assumed based on the brand or product description alone. Different Ingersoll Rand compressor series, power ratings, and production revisions may use filter materials with different dimensions, structures, and filtration characteristics. Even if two filter pads look similar, they may not be interchangeable. Before ordering, provide the complete compressor model, serial number, and original filter pad part number so compatibility with 23561319 can be checked against the equipment parts catalog.

Q4: What is the difference between a Filter Pad and a conventional air filter element?

A: A filter pad is generally a flat or sheet-type filtration material installed in an internal filter frame, intake grille, or designated filtration position. A conventional air filter element usually has a separate housing or structured cartridge with specific mounting connections. The two components can differ in installation method, filtration area, sealing arrangement, and maintenance requirements. A filter pad should not be used as a direct substitute for a complete filter element unless the equipment manufacturer specifically approves the configuration.

Q5: How often should the 23561319 Filter Pad be inspected or replaced?

A: Inspection and replacement intervals depend on operating hours, airborne dust concentration, humidity, and the ventilation conditions around the equipment. In dusty environments, the filter media may accumulate contaminants more quickly and require more frequent inspection. During routine maintenance, check for excessive dust buildup, blockage, tearing, or deformation. Reduced airflow, rising internal temperatures, or visible dust accumulation around the filtration area may indicate that the filter pad needs attention. Follow the maintenance schedule specified for the relevant equipment model.

Q6: Can the 23561319 Filter Pad be cleaned and reused?

A: Whether the filter pad can be cleaned depends on its material construction and the manufacturer’s maintenance instructions. Some filter pads are designed for replacement rather than reuse, and cleaning may damage the fiber structure or reduce filtration efficiency. Other types may allow cleaning using an approved procedure. Do not use compressed air, water, or chemical cleaning agents without confirming that the material is suitable for that treatment. If the pad is damaged, deformed, or remains blocked after approved cleaning, replace it with the correct part.

Q7: What precautions should be taken when installing the 23561319 Filter Pad?

A: Before installation, shut down the relevant equipment and follow the required maintenance safety procedure. When removing the old filter pad, take care not to allow accumulated dust to enter the machine. Clean the filter frame and contact surfaces, and inspect the mounting structure for damage. Position the new pad according to the original installation arrangement, ensuring that its edges fit properly and that it is securely retained. Avoid folds, raised edges, or visible gaps that could allow unfiltered air to bypass the media. After installation, check that the filter area is secure and airflow passages are unobstructed.

Q8: What should be checked if airflow remains restricted or equipment temperature rises after replacing the Filter Pad?

A: First, check whether the replacement pad is correctly installed and whether it is folded, blocked, or covering an unintended part of the airflow passage. Then inspect the filter frame, intake grille, and surrounding air ducts for dust buildup or foreign objects. If the filter pad and intake passages are clear, check the fan operation, ventilation openings, and other potential cooling obstructions. For air compressors, also consider operating load, ambient temperature, and the condition of the cooling system. Not every airflow or temperature problem is caused by the filter pad, so further diagnosis should follow the maintenance procedure for the specific equipment model.