Siemens 6AG1132-4HB01-2AB0 Digital Output Module
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Model | 6AG1132-4HB01-2AB0 |
| Product Name | Digital Output Module |
| Product Series | SIPLUS ET 200S |
| Module Type | EM 2RO Relay Output Module |
| Base Model | 6ES7132-4HB01-0AB0 |
| Number of Digital Output Channels | 2 |
| Output Type | Relay Output |
| Rated Load Supply Voltage | 24 V DC |
| Relay Contact Switching Voltage | 24 V DC to 230 V AC |
| Rated Output Current per Channel | 5 A |
| Maximum Continuous Thermal Current | 5 A |
| Minimum Load Current | 8 mA |
| Short-Circuit Protection | Not supported |
| Inductive Load Switching Voltage Limitation | Not supported |
| Maximum Switching Frequency | 2 Hz |
| Maximum Switching Frequency | 0.5 Hz |
| Maximum Switching Frequency (Lamp Load) | 2 Hz |
| Load Supply Reverse Polarity Protection | Supported |
| Load Supply Current Consumption Without Load | Max. 30 mA |
| Backplane Bus Current Consumption | Max. 10 mA at 3.3 V DC |
| Typical Power Dissipation | 0.6 W |
| Address Space | 1 byte unpacked; 2 bits packed |
| Digital Input Control | Supported |
| Output Status Indicator | Green LED |
| Group Fault Indicator | SF LED |
| Substitute Value Output | Supported; configurable as 0 or 1 |
| Electrical Isolation Between Channels | Supported |
| Isolation from Backplane Bus | Supported |
| Isolation from Load Supply | Supported |
| Maximum Cable Length | 1,000 m |
| Maximum Cable Length | 600 m |
| Diagnostic Function | No individual channel diagnostics |
| Protective Coating | Conformal Coating |
| Operating Temperature | -25°C to +70°C |
| Mounting System | SIMATIC ET 200S |
| Module Width | 15 mm |
| Packaging Quantity | 5 units per package |
| Dimensions | 15 × 81 × 52 mm |
| Weight | 0.05 kg |
FAQ
Q1: What is the main function of the Siemens 6AG1132-4HB01-2AB0 Digital Output Module?
A: The Siemens 6AG1132-4HB01-2AB0 is a two-channel relay output module designed for the SIMATIC ET 200S distributed I/O system. It converts digital control commands from a PLC into switching actions through its relay contacts. It can be used to control compatible AC or DC loads, including solenoid valves, contactor coils, alarm devices and other industrial equipment. Unlike transistor output modules, relay outputs provide contact-based electrical isolation, making them useful in control circuits that require switching different types of loads.
Q2: How many output channels does this module provide, and can they be controlled independently?
A: The module provides two independent relay output channels. Each channel can be controlled separately through the PLC program, allowing two different field devices or control circuits to operate independently. During hardware configuration, engineers must assign the correct output addresses and ensure that the PLC logic corresponds to the physical wiring. The two relay outputs should not simply be connected in parallel to increase the available load current or to create a redundant switching arrangement.
Q3: What load voltage and current can the relay outputs support?
A: The relay contacts are designed for switching loads within the specified range of 24 V DC to 230 V AC. The rated output current is 5 A per channel, and the maximum continuous thermal current is also 5 A. Actual load suitability depends on the operating voltage, load type, startup current and switching frequency. When controlling motors, solenoids or other inductive devices, engineers should pay particular attention to inrush current and contact arcing, as these factors can significantly affect relay contact life.
Q4: Does the 6AG1132-4HB01-2AB0 provide short-circuit protection?
A: No. This relay output module does not have built-in short-circuit protection. External circuit protection, such as appropriately rated fuses or circuit breakers, must therefore be provided according to the connected load and wiring design. If a short circuit occurs, disconnect the relevant power supply before inspecting the load, cables and terminal connections. The cause of the fault must be identified and corrected before the circuit is energized again. Neither the PLC program nor the relay contacts should be treated as a substitute for proper short-circuit protection.
Q5: Can this module directly control solenoid valves and other inductive loads?
A: Yes, provided that the electrical ratings and switching frequency remain within the module’s specified limits. For inductive loads, the maximum switching frequency is 0.5 Hz, compared with 2 Hz for resistive loads. Solenoid coils and contactor coils can generate reverse voltage when de-energized, potentially causing contact arcing and accelerated contact wear. Suitable surge suppression components should be considered according to the load characteristics. Always verify the actual coil voltage and current before connecting the device.
Q6: What is the difference between the SIPLUS 6AG1132-4HB01-2AB0 and the standard 6ES7132-4HB01-0AB0?
A: The 6AG1132-4HB01-2AB0 is the SIPLUS version based on the standard 6ES7132-4HB01-0AB0. Its main environmental features include conformal coating and a specified operating temperature range of -25°C to +70°C. These characteristics make it more suitable for industrial installations exposed to wider temperature variations or certain environmental contaminants. Although the two versions share the basic function of a two-channel ET 200S relay output module, engineers should verify the complete order number, hardware configuration and wiring requirements before replacing one with the other.
Q7: Does the module provide electrical isolation between its output channels?
A: Yes. The module provides electrical isolation between the two relay output channels. The outputs are also isolated from the backplane bus and load supply. This design helps reduce electrical interference between separate control circuits and offers greater flexibility when switching different field devices. However, electrical isolation does not remove the need to observe rated voltage limits, insulation requirements and applicable safety standards. When working with 230 V AC circuits, installation and maintenance should be performed by qualified personnel with the power safely disconnected.
Q8: How should engineers troubleshoot relay outputs that fail to operate correctly?
A: Troubleshooting should begin with the power supply, PLC control signal, wiring and connected load. First, confirm that the module has the required 24 V DC load supply and that the ET 200S station is communicating properly with the PLC. Next, check the output address, program logic and substitute value settings to ensure that the correct switching command is being issued. Inspect the relay terminals, external fuses and load wiring for loose connections, broken conductors or short circuits. If the PLC command is correct but the field device still does not respond, inspect the relay contacts for wear, burning or poor electrical contact, particularly if the module has frequently switched inductive loads. Always isolate hazardous power before carrying out physical inspections.
Siemens 6AG1132-4HB01-2AB0 Digital Output Module is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








