Siemens 6AG1132-6BF01-7BA0 Digital Output Module
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Model | 6AG1132-6BF01-7BA0 |
| Product Series | SIPLUS ET 200SP |
| Product Type | Digital Output Module |
| Module Type | DQ 8x24VDC/0.5A ST |
| Base Model | 6ES7132-6BF01-0BA0 |
| Number of Digital Output Channels | 8 |
| Output Type | PNP Transistor, Source Output |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Voltage Range | 19.2–28.8 V DC |
| Rated Output Voltage | 24 V DC |
| Maximum Output Current per Channel | 0.5 A |
| Maximum Total Module Output Current | 4 A |
| Maximum Switching Capacity for Resistive Loads | 0.5 A |
| Maximum Switching Capacity for Inductive Loads | 0.5 A |
| Maximum Switching Capacity for Lamp Loads | 5 W |
| Output Short-Circuit Protection | Supported, electronic protection |
| Wire-Break Detection | Supported |
| Reverse Polarity Protection | Supported |
| Output Signal Delay (0 to 1) | Max. 50 μs |
| Output Signal Delay (1 to 0) | Max. 100 μs |
| Maximum Switching Frequency for Resistive Loads | 100 Hz |
| Maximum Switching Frequency for Inductive Loads | 0.1 Hz |
| Maximum Switching Frequency for Lamp Loads | 10 Hz |
| Maximum Current Consumption (No Load) | 35 mA |
| Typical Power Loss | 1 W |
| Diagnostic Functions | Supply voltage monitoring, wire-break detection, short circuit to M, short circuit to L+ |
| Status Indicators | PWR power LED, channel status LEDs, DIAG diagnostic LED |
| Diagnostic Alarms | Supported |
| Redundancy Capability | Supported |
| Firmware Update | Not supported |
| Identification and Maintenance Data | I&M0 to I&M3 supported |
| Compatible BaseUnit | BU Type A0 |
| Color Code | CC02 |
| Mechanical Coding | Type A |
| Protective Coating | Conformal coating |
| Operating Temperature | -40 to +70 °C |
| Operating Temperature | -40 to +50 °C |
| High-Temperature Current Limitation | Maximum total output current of 1.0 A above +60 °C ambient temperature in horizontal installation |
| Protection Rating | IP20 |
| Maximum Installation Altitude | 5000 m |
| Output Address Space | 1 byte |
| QI Information Address Space | Additional 1 byte |
| Dimensions | 15 × 73 × 58 mm |
| Weight | 0.03 kg |
FAQ
Q1: What is the main function of the Siemens 6AG1132-6BF01-7BA0?
A: The 6AG1132-6BF01-7BA0 belongs to the Siemens SIPLUS ET 200SP distributed I/O system. Its primary function is to convert digital control signals from a PLC into 24 V DC switching signals for field devices. It provides eight transistor output channels and can control compatible devices such as relays, indicator lamps, solenoid valves, and other DC loads. This Standard (ST) module supports electronic output short-circuit protection and diagnostic alarms, making it suitable for industrial applications that require multiple digital output points.
Q2: What are the characteristics of its eight output channels?
A: The module uses PNP source-type transistor outputs and provides eight independent channels, each with a maximum output current of 0.5 A. When an output is activated, it supplies a positive voltage signal to the connected load. The module supports resistive and inductive loads with a maximum switching capacity of 0.5 A per channel, while the maximum switching capacity for lamp loads is 5 W. During system design, both the individual channel current and the total module current must be considered. The rated current of every channel should not simply be treated as a continuous simultaneous operating allowance without checking the overall load conditions.
Q3: Which BaseUnit is required for this module?
A: The 6AG1132-6BF01-7BA0 is designed for use with a BU Type A0 BaseUnit. It has color code CC02 and Type A mechanical coding. The BaseUnit provides the electrical connection between the module and field devices, so its terminal arrangement must match the intended wiring configuration. For applications requiring three-wire or four-wire connections, a suitable BaseUnit with AUX terminals or an appropriate potential distribution module may be necessary. Always verify the complete BaseUnit order number and terminal layout before installation.
Q4: What diagnostic and protection functions does the module provide?
A: The module features electronic output short-circuit protection and supports wire-break detection and diagnostic alarms. Its diagnostic functions include supply voltage monitoring, wire-break detection, short circuits to M, and short circuits to L+. Status indicators include a green PWR power LED, green channel status LEDs, and a DIAG diagnostic LED. These indicators help maintenance personnel assess the module’s operating condition. Some diagnostic functions are module-level rather than individually identifying every channel fault, so troubleshooting should combine LED indications, PLC diagnostic buffer messages, and electrical measurements.
Q5: What is the operating temperature range, and which industrial environments are suitable?
A: As a SIPLUS product, the module features conformal coating and supports an extended operating temperature range. For horizontal installation, the specified range is -40 to +70 °C. For vertical installation, it is -40 to +50 °C. An important limitation applies when the module is installed horizontally: if the ambient temperature exceeds +60 °C, the maximum total output current is limited to 1.0 A. The module is suitable for industrial control cabinets and automation equipment exposed to varying temperatures, provided that installation orientation, load limits, and ventilation requirements are observed.
Q6: Can this module drive solenoid valves, relay coils, and other inductive loads?
A: Yes. It can control compatible 24 V DC loads, including solenoid valves and relay coils, provided that the current of each output channel does not exceed 0.5 A. The module supports inductive loads with a maximum switching capacity of 0.5 A per channel and includes inductive turn-off voltage limiting. However, relay coils and solenoid valves can generate reverse voltage when switched off. Their electrical characteristics and any additional suppression requirements should therefore be checked before connection. The maximum switching frequency for inductive loads is 0.1 Hz, which is significantly lower than the 100 Hz limit for resistive loads. This makes it important to evaluate switching frequency when designing the control application.
Q7: How should you troubleshoot an output channel that does not respond?
A: Begin by checking the 24 V DC supply and confirming that it remains within the permitted range of 19.2–28.8 V DC. Observe the PWR and DIAG LEDs to identify abnormal status indications. Next, inspect the BaseUnit installation, output terminal connections, and field wiring for loose connections, open circuits, or short circuits. Verify the output address and control logic in the PLC program, then review the diagnostic alarms. If the PLC sends a valid output command but the field device does not respond, measure the voltage at the relevant output terminal and check whether the load current exceeds the rated value. For intermittent faults, also inspect terminal connections, load inrush current, and possible module overheating.
Q8: What compatibility and configuration checks are required when installing or replacing the module?
A: First, verify the complete order number, 6AG1132-6BF01-7BA0, and its base model, 6ES7132-6BF01-0BA0. This helps prevent confusion with other ET 200SP output modules that may have different functional levels or electrical specifications. Use a compatible BU Type A0 BaseUnit and check that the color code, mechanical coding, and terminal arrangement match the installation requirements. Before replacement, isolate the relevant power supply in accordance with the site’s electrical safety procedures. After installation, verify module identification, hardware configuration, and output address assignment in the engineering software. Finally, test each output channel, review diagnostic status, and confirm that all connected field devices operate correctly before returning the system to service.
Siemens 6AG1132-6BF01-7BA0 Digital Output Module is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








