Siemens 6AG1132-6BH01-7BA0 Digital Output Module
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 6AG1132-6BH01-7BA0 |
| Product Series | Siemens SIPLUS ET 200SP |
| Product Type | Digital Output Module |
| Product Designation | DQ 16x24VDC/0.5A ST |
| Reference Module | 6ES7132-6BH01-0BA0 |
| Number of Digital Outputs | 16 |
| Output Type | PNP source output |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Voltage Range | 19.2–28.8 V DC |
| Rated Output Current | 0.5 A per channel |
| Maximum Total Output Current | 8 A per module, subject to derating |
| Short-Circuit Protection | Yes, electronic |
| Short-Circuit Response Threshold | Typically 1 A (0.7–1.3 A) |
| Open-Circuit Detection | Supported |
| Residual Current in OFF State | Maximum 0.1 mA |
| Output Switching Delay | Typically 50 μs (OFF to ON), 100 μs (ON to OFF) |
| Maximum Switching Frequency | 100 Hz for resistive loads; 0.1 Hz for inductive loads; 10 Hz for lamp loads |
| Maximum Load Capacity | 0.5 A resistive or inductive load; 5 W lamp load |
| Load Resistance Range | 48 Ω–12 kΩ |
| Inductive Load Voltage Limitation | Typically L+ (-50 V) |
| Parallel Output Operation | Not permitted for increasing output current; supported for redundant load control |
| Diagnostic Functions | Supply voltage monitoring, wire-break detection, short circuit to M and short circuit to L+ |
| Diagnostic Alarms | Supported |
| Substitute Value Function | Supported |
| BaseUnit Compatibility | BU type A0 |
| Module Color Code | CC00 |
| Address Space | 2 bytes of output data plus 2 bytes for QI information |
| Firmware Update | Not supported |
| Identification and Maintenance Data | I&M0 to I&M3 |
| Typical Power Loss | 1 W |
| Conformal Coating | Yes |
| Operating Temperature | -40 to +70°C; -40 to +50°C |
| Maximum Module Output Current – Horizontal Installation | 8 A up to 40°C; 6 A up to 50°C; 4 A up to 60°C; maximum 1 A above 60°C |
| Maximum Module Output Current – Vertical Installation | 8 A up to 30°C; 6 A up to 40°C; 4 A up to 50°C |
| Protection Rating | IP20 |
| Maximum Shielded Cable Length | 1,000 m |
| Maximum Unshielded Cable Length | 600 m |
| Dimensions | 15 × 73 × 58 mm |
| Weight | 0.03 kg |
FAQ
Q1: What is the main function of the Siemens 6AG1132-6BH01-7BA0 module?
The Siemens 6AG1132-6BH01-7BA0 is a SIPLUS ET 200SP digital output module designed to control external devices through 16 independent 24 V DC output channels. It sends switching signals from the PLC to field devices such as relays, solenoid valves, contactors, and other compatible actuators. Its PNP source-output design supplies current to the connected load when an output is activated. The module is suitable for distributed automation systems that require reliable digital output control.
Q2: How many output channels does the 6AG1132-6BH01-7BA0 provide, and what is the rated current per channel?
This module provides 16 digital output channels, each with a rated output current of 0.5 A. The maximum total output current is 8 A per module under specified operating conditions. The actual permissible total current depends on the installation orientation and ambient temperature. When designing the output circuit, engineers should consider the current requirements of each connected load and follow the manufacturer’s derating specifications.
Q3: Which BaseUnit is compatible with the Siemens 6AG1132-6BH01-7BA0?
The 6AG1132-6BH01-7BA0 is designed for use with a BU type A0 BaseUnit. A suitable BaseUnit must be selected according to the required wiring arrangement and power distribution configuration. For a 1-wire connection, BU type A0 can be used directly. Two-, three-, and four-wire connection arrangements require the appropriate potential distribution arrangement or compatible auxiliary terminals. Always verify the BaseUnit configuration before installation.
Q4: What is the difference between the 6AG1132-6BH01-7BA0 and the standard 6ES7132-6BH01-0BA0?
The 6AG1132-6BH01-7BA0 is a SIPLUS version based on the standard 6ES7132-6BH01-0BA0 digital output module. Both share the DQ 16x24VDC/0.5A ST output configuration, including 16 PNP channels and a rated current of 0.5 A per channel. The SIPLUS version features conformal coating and an extended operating temperature range of -40 to +70°C under the specified installation conditions. It is intended for applications where environmental protection and wider temperature tolerance are important.
Q5: Does the 6AG1132-6BH01-7BA0 provide short-circuit and overload protection?
Yes. The module has electronic short-circuit protection for its digital outputs, with a typical response threshold of 1 A. It also supports open-circuit detection and diagnostic functions for identifying certain output and wiring problems. These functions help maintenance personnel locate faults and reduce troubleshooting time. However, the module’s protection features do not replace proper external circuit protection or correct load selection. The connected devices and wiring must remain within the specified electrical limits.
Q6: What diagnostic information can be obtained from the 6AG1132-6BH01-7BA0?
The module supports diagnostics for supply voltage monitoring, wire breaks, short circuits to M, and short circuits to L+. It can also generate diagnostic alarms and supports substitute values. Some diagnostic information is provided at module level rather than independently for every output channel. During commissioning, engineers should enable the relevant diagnostic settings in the PLC engineering software and verify that the controller correctly processes the reported diagnostic events.
Q7: What should engineers consider when installing the 6AG1132-6BH01-7BA0 in high-temperature environments?
The module supports an operating temperature range of -40 to +70°C for horizontal installation and -40 to +50°C for vertical installation. However, the maximum permitted total output current decreases as the ambient temperature rises. For horizontal installation, the module supports up to 8 A at temperatures up to 40°C, 6 A up to 50°C, and 4 A up to 60°C. Above 60°C, the total output current is limited to 1 A. Vertical installation has its own derating limits. Engineers should check the actual cabinet temperature, mounting orientation, ventilation, and load distribution before commissioning.
Q8: Can two outputs of the 6AG1132-6BH01-7BA0 be connected in parallel?
Two outputs must not be connected in parallel to increase the available output current. The module does, however, support parallel output operation for redundant control of a load under the specified configuration. These are different applications and should not be confused. Before implementing redundant control, engineers should verify the wiring arrangement, load characteristics, PLC configuration, and applicable Siemens instructions to ensure that the circuit operates safely and correctly.
Siemens 6AG1132-6BH01-7BA0 Digital Output Module is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








