Your Trusted PLC & DCS Supplier!
100% Original, Ready to Ship!

Schneider TM221C40U Modicon M221 Logic Controller

  • Manufacturer: Schneider
  • Product Number: TM221C40U
  • Condition: New & In Stock
  • Product Type: Modicon M221 Logic Controller
  • Origin: France
  • Payment Methods: T/T, Western Union
  • Dimensions: 90 × 70 × 160 mm
  • Weight: 0.63 kg
  • Shipping Port: Xiamen, China
  • Lead Time: 1-3 Working Days
  • Warranty: One Year
  • Certificate: COO
  • Courier partners: DHL, UPS, TNT, FedEx and EMS.

Product Detail

Contact Us

FAQS

Packing & Delivery

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Technical Specifications

Parameter Description
Brand Schneider Electric
Model TM221C40U
Product Series Modicon M221
Product Type Logic Controller / PLC
Rated Supply Voltage 24 V DC
Supply Voltage Range 20.4–28.8 V DC
Total Digital I/O 40 points
Digital Inputs 24 points
Standard Digital Inputs 20 points
High-Speed Digital Inputs 4 points
Input Standard IEC 61131-2 Type 1
Input Voltage 24 V DC
Input Logic Sink or Source
Analog Inputs 2 channels
Analog Input Range 0–10 V DC
Analog Input Resolution 10-bit
Analog Input Conversion Time 1 ms per channel + one controller cycle
Digital Outputs 16 transistor outputs
Standard Transistor Outputs 12 points
High-Speed Transistor Outputs 4 points
Output Type NPN, sink output
Output Voltage 24 V DC
Maximum Output Current per Point 0.5 A
Maximum Current per Output Common 4 A
High-Speed Output Functions PWM, PLS, PTO, FREQGEN
High-Speed Output Frequency Up to 100 kHz on Q0–Q3
Standard Output Frequency Up to 0.1 kHz on Q4–Q15
High-Speed Counter Function 4 high-speed inputs, supporting HSC
Maximum Local I/O Expansion 7 modules
Maximum Remote I/O Expansion 14 modules
Expansion Module Series Modicon TM3
Maximum Power Consumption 4.1 W without I/O expansion; 16 W with maximum expansion configuration
Expansion Bus Power Supply 5 V DC / 0.52 A; 24 V DC / 0.3 A
Inrush Current 35 A
Programming Interface USB Mini-B
Serial Communication RS-232 / RS-485
Communication Protocols Modbus RTU, Modbus ASCII, SoMachine Network
Ethernet Interface Not available
Program Memory 256 kB internal flash memory
Optional Storage SD card
Programming Software EcoStruxure Machine Expert – Basic
Mounting Type 35 mm DIN rail or panel mounting
Protection Rating IP20
Dimensions 90 × 70 × 160 mm
Weight 0.63 kg

FAQ

1. What is the main function of the Schneider TM221C40U Logic Controller?

The Schneider Electric TM221C40U is a 40-point programmable logic controller from the Modicon M221 series. It is designed to manage machine automation tasks involving digital signals, analog measurements, and high-speed pulse processing. The controller integrates 24 digital inputs, 16 NPN transistor outputs, and 2 analog inputs, making it suitable for small and medium-sized industrial machines. Typical applications include packaging equipment, conveyor systems, automated assembly machines, material handling equipment, and general-purpose production lines. Its combination of standard I/O and high-speed functions allows engineers to implement machine sequencing, sensor monitoring, actuator control, and basic motion-related operations in a compact control system.

2. What is the difference between the TM221C40U and TM221C40T?

The main difference is the transistor output configuration. The TM221C40U uses NPN sink-type transistor outputs, while the TM221C40T uses PNP source-type transistor outputs. The TM221C40U has 12 standard transistor outputs and 4 high-speed outputs; the TM221C40T has 14 standard outputs and 2 high-speed outputs. This difference affects field wiring, load connection, and the allocation of high-speed output channels. The two models should not be treated as direct wiring replacements. Before replacing one with the other, engineers should check the output circuit design, connected device input type, common terminal arrangement, and pulse-control requirements.

3. How should the NPN transistor outputs of the TM221C40U be connected?

The TM221C40U uses NPN sink-type transistor outputs. In a typical DC switching circuit, the load is connected between the positive 24 V supply and the PLC output. When an output turns on, the transistor provides a current path toward 0 V, allowing current to flow through the load. This differs from PNP source-type wiring, where the PLC output supplies positive voltage to the load. The maximum rated current is 0.5 A per output, with a maximum current of 4 A per output common. Before connecting solenoid valves, relays, or other DC loads, verify the load current and wiring arrangement. Inductive loads should have suitable suppression protection to reduce voltage spikes during switching.

4. Can the TM221C40U be used for high-speed counting and pulse control?

Yes. The controller provides four high-speed digital inputs that can be configured for high-speed counter functions. These inputs are suitable for receiving signals from incremental encoders, proximity sensors, and other pulse-generating devices. The four high-speed transistor outputs, Q0–Q3, support functions such as PWM, PLS, PTO, and frequency generation, with supported high-speed output frequencies of up to 100 kHz in the specified modes. This makes the controller useful for applications such as speed monitoring, pulse-based positioning, and stepper-drive control. Actual performance depends on the selected function, wiring quality, signal characteristics, and the configuration of the connected equipment.

5. What analog signals can the TM221C40U receive?

The TM221C40U includes two built-in analog input channels for 0–10 V DC signals. Each channel has a 10-bit resolution, with a conversion time of 1 ms per channel plus one controller cycle. These inputs can be used with compatible voltage-output sensors and transmitters for pressure, temperature, level, or position monitoring. The PLC program can scale the raw input values into engineering units and use them for process monitoring, alarm generation, or control decisions. The analog inputs are designed for voltage signals rather than direct connection to every type of industrial transmitter. If a sensor provides a 4–20 mA output, an appropriate signal-conversion device or compatible input solution is required.

6. Which expansion modules can be used with the TM221C40U?

The TM221C40U supports Modicon TM3 expansion modules, allowing the system to be extended with additional digital or analog I/O according to application requirements. It supports up to seven modules in a local I/O architecture and up to 14 modules in a supported remote I/O architecture. Expansion planning should take into account module compatibility, bus power capacity, total power consumption, and the required I/O addressing. The expansion bus provides 5 V DC and 24 V DC power within its specified current limits. After installing additional modules, configure the hardware in EcoStruxure Machine Expert – Basic and verify that every module is correctly detected before commissioning the machine.

7. What communication interfaces and protocols does the TM221C40U support?

The TM221C40U provides a USB Mini-B programming interface and serial communication capabilities supporting RS-232 and RS-485. It supports Modbus RTU, Modbus ASCII, and SoMachine Network communication, allowing it to exchange data with compatible HMIs, drives, meters, and other industrial devices. The serial interface can be configured according to the communication requirements of the connected equipment, including baud rate, parity, data bits, and device address where applicable. The TM221C40U does not have a built-in Ethernet port. If direct Ethernet connectivity is required, a suitable Ethernet-equipped M221 model should be selected rather than assuming that this model provides the same network interfaces.

8. What should be checked if the TM221C40U has output or communication problems?

Start by checking the 24 V DC power supply and the controller’s PWR, RUN, and ERR indicators. If an input signal is missing, inspect the sensor supply, input common, signal polarity, and terminal connections. If an output does not operate, confirm that the connected load is wired for an NPN sink output, that its power supply is available, and that the output current does not exceed the rated limit. For high-speed functions, verify the assigned channels, pulse frequency, signal wiring, and connected drive configuration. Communication faults should be investigated by checking the RS-232 or RS-485 wiring, communication mode, protocol, baud rate, parity, and device address. Use EcoStruxure Machine Expert – Basic to monitor I/O states, controller status, and program execution. This helps distinguish between wiring faults, configuration errors, external equipment problems, and possible PLC hardware failures.

Schneider TM221C40U Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China


Company Introduction

Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.

We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.

Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.

Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia

Our Mission

Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.

Does this product come with a warranty?

We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.

How to Verify Products Before Purchase?

We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.

How long does shipping take?

Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.

What is the minimum order quantity (MOQ)?

The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.

Can I get discounts for bulk purchases of products?

Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.

What payment methods do you accept for wholesale orders?

We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.

Can I purchase different quantities of a product?

Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.

Are there any discounts or promotions available for new wholesale customers?

We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.

When purchasing a product, how can I ensure compatibility with my existing systems?

If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.

Can I return the goods I received if they do not meet our requirements?

Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.

Do you provide technical support or installation services to wholesale customers?

Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.

Hot Tags :

 

Prev or Next:

Send Us An Inquiry


Write your inquiry here and send it to us

Send Us An Inquiry


No:86996