Schneider TM221CE40T Modicon M221 Logic Controller
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Model | TM221CE40T |
| Brand | Schneider Electric |
| Product Series | Modicon M221 |
| Product Type | Logic Controller / PLC |
| Total I/O Points | 40 |
| Rated Supply Voltage | 24 V DC |
| Supply Voltage Range | 20.4–28.8 V DC |
| Digital Inputs | 24, IEC 61131-2 Type 1 |
| High-Speed Digital Inputs | 4 |
| Input Signal Type | 24 V DC |
| Input Logic | Sink / Source |
| Analog Inputs | 2 channels, 0–10 V DC |
| Analog Input Resolution | 10 bit |
| Analog Input Accuracy | ±1% of full scale |
| Analog Input Conversion Time | 1 ms per channel, plus one controller cycle |
| Digital Outputs | 16 transistor outputs |
| Output Type | PNP transistor, source logic |
| Rated Output Voltage | 24 V DC |
| Output Current per Point | 0.5 A |
| Maximum Current per Output Common | 4 A |
| High-Speed Outputs | 2 |
| High-Speed Output Frequency | Up to 100 kHz on Q0–Q1 in PWM/PLS mode |
| Other Output Frequencies | Up to 5 kHz on Q2–Q3; up to 0.1 kHz on Q4–Q15 |
| High-Speed Control Functions | PWM, PLS, frequency generator |
| Supported Control Signal Types | A/B, pulse/direction, single-phase |
| Local I/O Expansion Capacity | Up to 7 expansion modules |
| Expansion Bus Power Supply | 5 V DC / 0.52 A; 24 V DC / 0.3 A |
| Maximum Inrush Current | 35 A |
| Power Consumption | Maximum 4.9 W without I/O expansion modules; maximum 17 W with maximum expansion configuration |
| Ethernet Interface | 1 RJ45 port, 10BASE-T/100BASE-TX |
| Serial Communication Interface | 1 RJ45 port, supporting RS232/RS485 |
| USB Interface | Mini-B USB 2.0 |
| Ethernet Protocols | Modbus TCP, EtherNet/IP |
| Serial Communication Protocols | Modbus RTU, Modbus ASCII |
| Program Memory | 256 KB Flash |
| SD Card Support | Supported |
| Programming Software | EcoStruxure Machine Expert – Basic |
| Output Protection | Overload and short-circuit protection, 1 A protection current level |
| Mounting | DIN rail or panel mounting |
| Protection Rating | IP20 (with protective cover installed) |
| Operating Temperature | -10 to 55°C (horizontal mounting); -10 to 35°C (vertical mounting) |
| Storage Temperature | -25 to 70°C |
| Relative Humidity | 10–95%, non-condensing |
| Mechanical Life | Approximately 20 million cycles for transistor outputs |
| Certifications | CE, cULus, RCM, EAC, ABS, LR, DNV-GL, UKCA |
| Dimensions | 90 × 70 × 160 mm |
| Weight | 0.456 kg |
FAQ
1. What is the main function of the Schneider Electric TM221CE40T Logic Controller?
The TM221CE40T is a programmable logic controller from the Modicon M221 series, designed for machine automation and industrial control applications. It provides 40 built-in I/O points, including 24 digital inputs, 2 analog inputs, and 16 transistor outputs. It processes field signals, executes control programs, and communicates with HMIs, drives, sensors, and other compatible automation devices. Typical applications include packaging machines, conveyor systems, material handling equipment, and production lines.
2. What is the difference between the TM221CE40T and TM221CE40R?
The main difference is the output type. The TM221CE40T uses 16 PNP transistor outputs, while the TM221CE40R uses relay outputs. Transistor outputs are suitable for fast switching and pulse-control applications, whereas relay outputs can switch compatible AC or DC loads. When selecting a replacement, check the output wiring, load characteristics, switching frequency, and control requirements. These two models should not be treated as direct substitutes without checking the application circuit.
3. What type of digital inputs and outputs does the TM221CE40T support?
The controller has 24 digital inputs and 16 PNP transistor outputs. The digital inputs operate at 24 V DC and support sink or source wiring configurations. The transistor outputs use positive logic, also known as source logic, with a rated output current of 0.5 A per point. Four inputs support high-speed operation, and two outputs provide high-speed pulse functions. Correct wiring and common-terminal connections are important for reliable operation.
4. Does the TM221CE40T support high-speed counting and pulse generation?
Yes. The controller supports high-speed input functions and provides two high-speed transistor outputs. Outputs Q0 and Q1 can operate at frequencies up to 100 kHz in PWM or PLS mode. The controller also supports frequency generation and control signal formats such as A/B, pulse/direction, and single-phase signals. These functions are useful for encoder feedback, product counting, and basic positioning applications. Actual performance depends on channel assignment and program configuration.
5. Which communication protocols are supported by the TM221CE40T?
The TM221CE40T provides an Ethernet port, an RS232/RS485 serial interface, and a Mini-B USB programming port. Its Ethernet communication services include Modbus TCP client/server and EtherNet/IP adapter functionality. The serial interface supports Modbus RTU and Modbus ASCII. These interfaces allow the PLC to exchange data with compatible HMIs, industrial computers, drives, and other controllers. Communication settings must match the connected equipment.
6. Can the TM221CE40T be expanded with additional I/O modules?
Yes. The TM221CE40T supports Modicon TM3 expansion modules for applications requiring additional digital or analog I/O channels. It supports up to seven local I/O expansion modules. The expansion design should take into account module compatibility, bus power capacity, total power consumption, and the required I/O configuration. Check the system documentation before adding modules to ensure that the complete configuration is supported.
7. Which programming software is used for the TM221CE40T?
The TM221CE40T is programmed using Schneider Electric’s EcoStruxure Machine Expert – Basic software, previously known as SoMachine Basic. The software supports hardware configuration, PLC programming, application downloading, online monitoring, and troubleshooting. The controller can be connected to a computer through its USB or Ethernet interface. Before downloading a program, confirm that the selected controller model and firmware configuration match the installed hardware.
8. What should be checked if the TM221CE40T has output or communication problems?
First, check the 24 V DC power supply and inspect the PWR, RUN, and ERR indicators. If an output does not operate, verify the PNP wiring, output common connections, load current, and PLC program logic. For high-speed outputs, confirm that the correct channels and pulse functions have been configured. If Ethernet communication fails, inspect the network cable, IP address, and communication settings. For serial communication faults, check the RS232/RS485 wiring, baud rate, and Modbus parameters. If the problem persists, review controller diagnostics and test the connected field devices separately.
Schneider TM221CE40T Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








