Schneider TM221M16TG Modicon M221 Logic Controller
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Model | TM221M16TG |
| Brand | Schneider Electric |
| Product Series | Modicon M221 |
| Product Type | Logic Controller (PLC) |
| Total I/O Points | 16 points |
| Digital Inputs | 8 channels, IEC 61131-2 Type 1 |
| High-Speed Inputs | 4 channels |
| Analog Inputs | 2 channels, 0–10 V DC |
| Analog Input Resolution | 10-bit |
| Digital Outputs | 8 transistor outputs |
| High-Speed Outputs | 2 channels |
| Output Type | PNP source type |
| Output Voltage | 24 V DC |
| Output Current per Point | 0.5 A |
| Rated Power Supply | 24 V DC |
| Supply Voltage Range | 20.4–28.8 V DC |
| Maximum Inrush Current | 35 A |
| Power Consumption | 3.2 W without I/O expansion; 22 W with maximum expansion configuration |
| Communication Interfaces | 2 RJ45 serial ports, Mini-B USB 2.0 |
| Serial Interface Types | RS485; RS232/RS485 |
| Communication Protocols | Modbus RTU, Modbus ASCII, SoMachine-Network |
| Expansion Capability | Up to 7 local I/O expansion modules; up to 14 modules in a remote I/O architecture |
| Internal Flash Memory | 256 KB |
| SD Card Support | Up to 2 GB |
| Wiring Type | Removable spring terminals |
| Programming Software | EcoStruxure Machine Expert – Basic |
| Mounting | 35 mm DIN rail or panel mounting |
| Protection Rating | IP20 |
| Operating Temperature | -10 to 55°C |
| Dimensions | 90 × 70 × 70 mm |
| Weight | 0.264 kg |
FAQ
Q1: What type of PLC is the Schneider TM221M16TG?
A: The Schneider Electric TM221M16TG is a compact logic controller from the Modicon M221 series. It provides 8 digital inputs, 2 analog inputs, and 8 transistor outputs in a compact control platform. It is suitable for small industrial machines, packaging equipment, conveyor systems, and general-purpose automation applications. Its integrated I/O and serial communication interfaces help reduce the need for additional control hardware in smaller installations.
Q2: Does the TM221M16TG use PNP or NPN transistor outputs?
A: The TM221M16TG uses PNP source-type transistor outputs. When an output is activated, it supplies positive voltage to the connected load. This output arrangement is commonly used with compatible DC solenoid valves, indicator devices, and intermediate relays. Before connecting field equipment, check the load’s rated voltage and current, verify the common-terminal wiring, and make sure the connected device is designed for PNP control. Incorrect wiring or excessive load current can cause output malfunction or damage.
Q3: Does the TM221M16TG support high-speed counting and pulse control?
A: Yes. The controller provides 4 high-speed inputs and 2 high-speed outputs for applications involving pulse signals, encoder feedback, and basic motion-related control. High-speed inputs can be configured for suitable counting functions, while the high-speed outputs support pulse-related functions such as PLS and PWM. These features are useful for monitoring rotating equipment, counting products on a conveyor, or sending pulse commands to compatible drives. The actual operating frequency and available functions depend on the terminal assignment, program configuration, and connected device requirements.
Q4: What types of analog devices can be connected to the TM221M16TG?
A: The TM221M16TG includes 2 built-in analog inputs for 0–10 V DC signals, with 10-bit resolution. Compatible devices may include voltage-output pressure transmitters, position sensors, and other process instruments. Before connecting a sensor, confirm that its output signal falls within the PLC input range. Pay attention to signal polarity, common-terminal wiring, cable shielding, and grounding. For installations in electrically noisy environments, keep analog signal cables separate from motor power cables and other high-interference wiring to improve measurement stability.
Q5: Does the TM221M16TG support Ethernet communication?
A: No. The TM221M16TG does not have a built-in Ethernet port. It provides two RJ45 serial communication interfaces and a Mini-B USB programming interface. The serial interfaces support RS485 and RS232/RS485 communication, with Modbus RTU and Modbus ASCII available for data exchange with compatible HMIs, variable speed drives, and other industrial devices. If an application requires direct Ethernet communication, such as Modbus TCP or Ethernet-based integration with a supervisory system, select an M221 controller model equipped with an Ethernet interface.
Q6: Which expansion modules are compatible with the TM221M16TG?
A: The TM221M16TG supports compatible Modicon TM3 expansion modules, allowing users to increase the number of digital or analog I/O points as machine requirements change. Expansion options can include additional digital inputs, transistor or relay outputs, and analog signal modules. A local I/O configuration can support up to 7 expansion modules. Remote I/O arrangements require additional consideration of the system architecture and supported communication hardware. Before installation, verify the exact TM3 module model, power consumption, wiring requirements, and controller configuration limits.
Q7: Which programming software should be used for the TM221M16TG?
A: The TM221M16TG is programmed using EcoStruxure Machine Expert – Basic, formerly known as SoMachine Basic. The software allows engineers to create and edit PLC programs, configure hardware, download applications, and monitor controller operation. During commissioning, technicians can use online monitoring to check input and output states, observe variable values, and identify incorrect program conditions. Keeping a backup of the original application before making changes is recommended, particularly when servicing equipment that is already operating in production.
Q8: How can input or output problems on the TM221M16TG be diagnosed?
A: Start by checking the 24 V DC power supply and confirming that the voltage remains within the specified operating range. Inspect the removable spring terminals, common connections, and field wiring for loose contacts, incorrect polarity, or damaged conductors. If a digital input does not respond, measure the signal from the connected sensor and compare it with the PLC input status in the programming software. For an output fault, confirm that the program conditions are satisfied and that the corresponding output is being commanded. Then check the PNP output wiring, load power supply, and connected device for short circuits or excessive current. If the electrical connections and program logic are correct but the fault remains, review the controller’s diagnostic indicators and consider whether the output channel or external load requires further testing. Always isolate the relevant power supply before inspecting or repairing wiring.
Schneider TM221M16TG Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








