Siemens 6AG1132-6GD51-7BA0 Digital Output Module
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | Siemens |
| Product Model | 6AG1132-6GD51-7BA0 |
| Product Series | SIPLUS ET 200SP |
| Product Type | Digital Output Module |
| Product Designation | RQ CO 4x24VDC/2A ST |
| Standard Reference Model | 6ES7132-6GD51-0BA0 |
| Output Type | Relay |
| Number of Digital Outputs | 4 |
| Number of Relay Outputs | 4 |
| Relay Contact Configuration | Changeover contact (CO) |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Voltage Range | 19.2–28.8 V DC |
| Reverse Polarity Protection | Yes |
| Rated Relay Coil Voltage | 24 V DC |
| Maximum Relay Coil Current | 40 mA for all relays |
| Maximum Output Current per Channel | 2 A |
| Maximum Total Output Current per Module | 8 A |
| Maximum Total Current – Horizontal Installation | 8 A up to 40°C; 6 A up to 50°C; 4 A up to 60°C |
| Maximum Total Current – Vertical Installation | 8 A up to 30°C; 6 A up to 40°C; 4 A up to 50°C |
| Maximum Resistive Load Switching Frequency | 2 Hz |
| Minimum Switching Current | 1 mA at 5 V DC |
| Maximum Contact Switching Current | 2 A with resistive load |
| Maximum Thermal Continuous Current | 2 A |
| Rated DC Switching Voltage | 24 V DC |
| Rated AC Switching Voltage | 24 V AC |
| Short-Circuit Protection | No |
| Parallel Output Operation | Supported for logic linking and redundant load control; not supported for increasing output current |
| Output Parameterization | Supported |
| Diagnostic Functions | Supply voltage monitoring |
| Diagnostic Alarm | Supported |
| Substitute Value Function | Supported |
| Wire-Break Detection | Not supported |
| Short-Circuit Diagnostics | Not supported |
| Status Indicators | Green PWR LED, green channel status LEDs, green/red DIAG LED |
| Typical Power Loss | 1.2 W |
| Rated Current Consumption | 50 mA |
| Compatible BaseUnit | BU type A0 |
| Color Code | CC00 |
| Mechanical Coding Element | Type C |
| Output Address Space | 1 byte |
| Input Address Space | 1 byte for QI information |
| Firmware Version | V0.0 |
| Firmware Update | Not supported |
| Identification and Maintenance Data | I&M0 to I&M3 |
| Redundancy Capability | Supported |
| Isolation Between Channels | Yes |
| Isolation Between Channels and Backplane Bus | Yes |
| Isolation Test Voltage | 707 V DC |
| Operating Temperature – Horizontal Installation | -40 to +70°C |
| Operating Temperature – Vertical Installation | -40 to +50°C |
| Maximum Installation Altitude | 5,000 m, subject to temperature and pressure derating |
| Conformal Coating | Yes |
| PCB Coating Classification | EN 61086 Class 2 |
| Protection Against Contamination | Type 1 |
| Protection Rating | IP20 |
| Maximum Shielded Cable Length | 1,000 m |
| Maximum Unshielded Cable Length | 200 m |
| Dimensions | 15 × 73 × 58 mm |
| Weight | 0.03 kg |
FAQ
Q1: What is the main function of the Siemens 6AG1132-6GD51-7BA0 Digital Output Module?
The Siemens 6AG1132-6GD51-7BA0 is a SIPLUS ET 200SP relay output module designed to switch external electrical loads in distributed automation systems. It provides four relay output channels with changeover contacts, allowing a PLC to control compatible AC or DC circuits through relay switching. Typical applications include controlling intermediate relays, signal circuits, small actuators and other industrial devices within the specified contact ratings. Its relay-based design also provides electrical isolation between the output contacts and the module’s internal electronics.
Q2: What is the difference between the 6AG1132-6GD51-7BA0 and the standard 6ES7132-6GD51-0BA0?
The 6AG1132-6GD51-7BA0 is the SIPLUS version based on the standard 6ES7132-6GD51-0BA0. Both models provide four relay outputs with a rated switching current of 2 A per channel. The SIPLUS version adds conformal coating to protect the electronic assemblies and supports an extended operating temperature range of -40 to +70°C for horizontal installation. This makes it suitable for industrial environments where temperature fluctuations, humidity and exposure to certain contaminants require additional environmental protection. The two models should still be selected according to their complete product specifications and installation requirements.
Q3: How many output channels does the 6AG1132-6GD51-7BA0 provide, and what is the maximum current?
The module provides four independent relay output channels. Each channel supports a maximum switching current of 2 A, while the maximum total output current per module is 8 A under specified operating conditions. The permitted total current is reduced at higher ambient temperatures and depends on the mounting orientation. For example, horizontal installation allows up to 8 A at temperatures up to 40°C, 6 A up to 50°C and 4 A up to 60°C. Engineers should calculate both individual contact currents and the combined module load before commissioning.
Q4: What type of relay contacts are used in the Siemens 6AG1132-6GD51-7BA0?
The module uses four relay outputs with changeover contacts, also known as CO contacts. Each changeover contact provides normally open and normally closed switching paths, allowing the control circuit to select the required contact state. The rated relay coil voltage is 24 V DC, while the external contact circuit must remain within the specified switching voltage and current limits. The minimum switching current is 1 mA at 5 V DC. When selecting loads, engineers should also consider contact life, switching frequency and the electrical characteristics of the connected device.
Q5: Does the 6AG1132-6GD51-7BA0 support parallel connection of output channels?
Yes. Two relay outputs can be connected in parallel for logic linking or redundant control of a load, provided the wiring and application follow the manufacturer’s instructions. However, parallel connection is not supported for increasing the available output current. Connecting two channels together does not change the rated 2 A maximum switching current of an individual contact or permit the module to exceed its specified total current. Before using parallel outputs, engineers should verify the circuit design, switching sequence and load characteristics to avoid unintended current paths or contact damage.
Q6: What diagnostic and fault-monitoring functions are available on this module?
The 6AG1132-6GD51-7BA0 supports module diagnostics, diagnostic alarms and supply voltage monitoring. The green PWR LED indicates the supply status, while the channel status LEDs show the switching state of the outputs. A green/red DIAG LED provides module-level diagnostic information. The module also supports substitute value output, which can be configured for defined operating or fault conditions. It does not provide wire-break detection or short-circuit diagnostics, so field wiring and external load circuits must be checked separately during troubleshooting.
Q7: Which BaseUnit is compatible with the Siemens 6AG1132-6GD51-7BA0?
The module is designed for use with a BU type A0 BaseUnit and has the CC00 module color code. It also features an automatic mechanical coding system with a type C coding element to help prevent incorrect module insertion. During installation, verify that the BaseUnit is correctly positioned in the ET 200SP station and that the wiring arrangement matches the relay contact configuration. The external load supply must be connected and protected separately according to the circuit design. Correct BaseUnit selection helps ensure reliable electrical connections and simplifies module replacement.
Q8: What installation precautions are important when using the 6AG1132-6GD51-7BA0 in harsh industrial environments?
The SIPLUS module supports an operating temperature range of -40 to +70°C for horizontal installation and -40 to +50°C for vertical installation. Its conformal coating provides additional protection against specified environmental influences, including certain chemically and biologically active substances. However, the output current must be reduced according to the ambient temperature and installation orientation. External short-circuit protection is also required because the module does not have built-in output short-circuit protection. During installation, maintain suitable cabinet ventilation, use correctly rated fuses, protect unused interfaces with the supplied covers and ensure that the operating environment remains within the product’s specified limits.
Siemens 6AG1132-6GD51-7BA0 Digital Output Module is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








