Your Trusted PLC & DCS Supplier!
100% Original, Ready to Ship!

Schneider TM221M32TK Modicon M221 Logic Controller

  • Manufacturer: Schneider
  • Product Number: TM221M32TK
  • Condition: New & In Stock
  • Product Type: Modicon M221 Logic Controller
  • Origin: France
  • Payment Methods: T/T, Western Union
  • Dimensions: 90 × 70 × 70 mm
  • Weight: 0.27 kg
  • Shipping Port: Xiamen, China
  • Lead Time: 1-3 Working Days
  • Warranty: One Year
  • Certificate: COO
  • Courier partners: DHL, UPS, TNT, FedEx and EMS.

Product Detail

Contact Us

FAQS

Packing & Delivery

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Technical Specifications

Parameter Specification
Model TM221M32TK
Brand Schneider Electric
Product Series Modicon M221
Product Type Logic Controller (PLC)
Total I/O Points 32 points
Digital Inputs 16 channels
High-Speed Inputs 4 channels, IEC 61131-2 Type 1
Analog Inputs 2 channels, 0–10 V DC
Analog Input Resolution 10-bit
Digital Outputs 16 transistor outputs
High-Speed Outputs 2 channels
Output Type PNP source type
Output Voltage 24 V DC
Output Current per Point 0.1 A
Maximum Current per Output Common 1.6 A
High-Speed Output Frequency Q0–Q1: up to 100 kHz in PWM/PLS mode
Other Output Frequencies Q2–Q3: up to 5 kHz; Q4–Q15: up to 0.1 kHz
Rated Power Supply 24 V DC
Supply Voltage Range 20.4–28.8 V DC
Maximum Inrush Current 35 A
Power Consumption 3.5 W without I/O expansion; 22.3 W with maximum expansion configuration
Input Logic Sink / Source
Analog Conversion Time 1 ms per channel + 1 controller cycle
Expansion Capability Up to 7 local I/O expansion modules; up to 14 modules with a remote I/O architecture
Expansion Bus Power Capacity 5 V DC: 0.52 A; 24 V DC: 0.48 A
Communication Interfaces 2 RJ45 serial ports, Mini-B USB 2.0
Serial Interface Types RS485, RS232/RS485
Communication Protocols Modbus RTU, Modbus ASCII, SoMachine-Network
Internal Flash Memory 256 KB
SD Card Support Up to 2 GB
Programming Software EcoStruxure Machine Expert – Basic
Mounting 35 mm DIN rail mounting
Protection Rating IP20
Operating Temperature -10 to 55°C
Dimensions 90 × 70 × 70 mm
Weight 0.27 kg

FAQ

Q1: What type of PLC is the Schneider TM221M32TK?

A: The TM221M32TK is a compact logic controller from Schneider Electric’s Modicon M221 series. It provides 32 digital I/O points, including 16 digital inputs and 16 transistor outputs, as well as 2 built-in 0–10 V analog inputs. It is suitable for packaging machinery, conveyor systems, automated production lines, and general machine control applications. Its integrated I/O, pulse-control capabilities, and serial communication interfaces make it a practical option for applications requiring multiple control signals without a large PLC installation.

Q2: What are the main characteristics of the TM221M32TK transistor outputs?

A: The TM221M32TK uses PNP source-type transistor outputs with a rated voltage of 24 V DC and a maximum current of 0.1 A per output point. When an output is activated, it supplies positive voltage to the connected load. These outputs are suitable for compatible indicator devices, control signal inputs, and low-current DC equipment. They should not be treated as high-current relay outputs. If the application requires controlling solenoid valves, contactors, or larger loads, an appropriately rated intermediate relay or driver module may be required. Always check the load current and output common current limits before connecting field devices.

Q3: Does the TM221M32TK support high-speed counting and encoder feedback?

A: Yes. The controller provides 4 high-speed digital inputs that can be used to receive encoder pulses, product-counting signals, and equipment speed feedback. Typical applications include conveyor product counting, rotating equipment monitoring, and sensor detection requiring fast signal response. Before enabling high-speed counting, configure the input assignments, counting mode, and filter parameters according to the application. The encoder’s output type must also be compatible with the PLC input electrical logic. For reliable signal acquisition, keep high-speed signal cables as short as practical and use appropriate shielding and grounding to reduce electrical interference.

Q4: Can the TM221M32TK control stepper motors or servo drives?

A: Yes. It can be used with compatible stepper motor or servo drives that accept pulse commands. The controller provides 2 high-speed transistor outputs, with Q0–Q1 supporting frequencies up to 100 kHz in PLS/PWM mode. These outputs can be used to send pulse-control signals to suitable drives. Before commissioning, verify the drive’s pulse input method, such as pulse/direction mode, as well as its voltage requirements, common-terminal wiring, and maximum pulse frequency. The PLC’s pulse output capability does not replace a dedicated multi-axis motion controller. Applications involving complex positioning, synchronized movement, or high-precision motion profiles may require a more advanced motion-control solution.

Q5: What analog signals can the TM221M32TK accept?

A: The controller has 2 built-in analog inputs for 0–10 V DC signals, with 10-bit resolution and an approximate 10 mV value per least significant bit. These inputs can be connected to compatible voltage-output pressure sensors, position sensors, and other industrial process instruments. Before wiring, confirm that the sensor’s output range matches the PLC input range and connect the analog common terminals correctly. In installations with variable speed drives, motors, or other sources of electrical interference, route analog signal cables separately from power cables. Shielded cables and proper grounding can help improve measurement stability and reduce signal fluctuations.

Q6: Does the TM221M32TK support Ethernet and which industrial communication protocols are available?

A: The TM221M32TK does not have a built-in Ethernet interface. It uses two RJ45 serial communication interfaces and a Mini-B USB port for communication and programming. One serial interface supports RS485, while the other supports RS232/RS485. Available communication protocols include Modbus RTU, Modbus ASCII, and SoMachine-Network. These interfaces can be used to exchange data with compatible HMIs, variable speed drives, and other automation equipment. If an application requires direct Ethernet communication, such as Modbus TCP or EtherNet/IP, choose an M221 controller model equipped with a built-in Ethernet interface. An RJ45 connector alone does not mean that the port supports Ethernet.

Q7: Which expansion modules are compatible with the TM221M32TK?

A: The TM221M32TK supports compatible Schneider Electric Modicon TM3 expansion modules. Depending on the application, these modules can add digital inputs, digital outputs, or analog I/O channels. A local I/O configuration supports up to 7 expansion modules, while a remote I/O architecture can support additional modules depending on the system configuration. Before installation, check the exact TM3 module model, controller compatibility, bus power capacity, and available mounting space. When several expansion modules are connected, calculate the total 5 V DC and 24 V DC bus current requirements. Insufficient expansion bus power can cause modules to malfunction, fail to be recognized, or operate intermittently.

Q8: How should you troubleshoot input, output, or communication faults on the TM221M32TK?

A: Troubleshooting should begin with the power supply, followed by field wiring, program logic, and communication settings. First, measure the 24 V DC supply and confirm that it remains within the specified 20.4–28.8 V DC range. Inspect the terminals for loose connections or damaged conductors. If a digital input does not respond, check the sensor output signal, input common connection, and input logic configuration. For transistor output faults, verify that the program conditions are satisfied and inspect the PNP wiring, load current, and output common connections. If communication is interrupted, check the RS232/RS485 wiring, baud rate, station address, parity settings, and termination resistor configuration where applicable. EcoStruxure Machine Expert – Basic can be used to monitor I/O states and program variables to help identify whether the fault originates from field equipment, communication wiring, or the PLC itself. Always isolate the relevant power supply before inspecting or repairing electrical connections.

Schneider TM221M32TK Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China


Company Introduction

Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.

We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.

Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.

Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia

Our Mission

Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.

Does this product come with a warranty?

We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.

How to Verify Products Before Purchase?

We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.

How long does shipping take?

Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.

What is the minimum order quantity (MOQ)?

The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.

Can I get discounts for bulk purchases of products?

Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.

What payment methods do you accept for wholesale orders?

We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.

Can I purchase different quantities of a product?

Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.

Are there any discounts or promotions available for new wholesale customers?

We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.

When purchasing a product, how can I ensure compatibility with my existing systems?

If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.

Can I return the goods I received if they do not meet our requirements?

Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.

Do you provide technical support or installation services to wholesale customers?

Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.

Hot Tags :

 

Prev or Next:

Send Us An Inquiry


Write your inquiry here and send it to us

Send Us An Inquiry


No:86996