Schneider TM221CE16U Modicon M221 Logic Controller
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Description |
|---|---|
| Brand | Schneider Electric |
| Model | TM221CE16U |
| Product Series | Modicon M221 |
| Product Type | Logic Controller / PLC |
| Rated Supply Voltage | 24 V DC |
| Supply Voltage Range | 20.4–28.8 V DC |
| Total Digital I/O | 16 points |
| Digital Inputs | 9 points |
| High-Speed Digital Inputs | 4 points |
| Input Standard | IEC 61131-2 Type 1 |
| Input Voltage | 24 V DC |
| Input Logic | Sink / Source |
| Analog Inputs | 2 channels |
| Analog Input Range | 0–10 V DC |
| Analog Input Resolution | 10-bit |
| Analog Input Conversion Time | 1 ms per channel + one controller cycle |
| Digital Outputs | 7 transistor outputs |
| High-Speed Transistor Outputs | 2 points |
| Output Type | NPN, sink output |
| Output Voltage | 24 V DC |
| Maximum Output Current per Point | 0.5 A |
| Maximum Output Common Current | 3.5 A |
| High-Speed Output Functions | PWM, pulse output, and related functions depending on configuration |
| High-Speed Output Response Time | Approximately 5 μs on Q0–Q1 |
| Maximum Local I/O Expansion | 4 modules |
| Maximum Remote I/O Expansion | 11 modules |
| Expansion Module Series | Modicon TM3 |
| Maximum Inrush Current | 35 A |
| Maximum Power Consumption | 4.6 W without expansion modules; 11 W with maximum expansion configuration |
| Expansion Bus Power Supply | 5 V DC / 0.325 A; 24 V DC / 0.15 A |
| Ethernet Interface | 1 Ethernet port, 10/100 Mbps |
| Serial Communication Interface | 1 serial port, supporting RS-232 / RS-485 |
| USB Interface | USB Mini-B |
| Communication Protocols | Modbus TCP, Modbus RTU, Modbus ASCII, SoMachine Network |
| Program Memory | 256 kB flash memory |
| Memory Card | SD card supported |
| Real-Time Clock | Built-in RTC |
| Programming Software | EcoStruxure Machine Expert – Basic |
| Mounting Type | 35 mm DIN rail or panel mounting |
| Protection Rating | IP20 |
| Dimensions | 90 × 70 × 95 mm |
| Weight | 0.626 kg |
FAQ
1. What types of automation applications is the Schneider TM221CE16U designed for?
The Schneider Electric TM221CE16U is a compact PLC from the Modicon M221 series, designed for small and medium-sized machinery and industrial automation systems. It integrates 9 digital inputs, 7 NPN transistor outputs, 2 analog inputs, and an Ethernet communication interface. This configuration allows it to process standard switching signals, analog feedback, and selected high-speed pulse signals. Typical applications include packaging equipment, conveyor systems, automated assembly machinery, material handling equipment, and small production lines. Its transistor outputs are suitable for DC loads requiring relatively fast switching or frequent operation, while the Ethernet interface allows the controller to exchange data with HMIs, supervisory computers, and other networked devices.
2. What are the main characteristics of the TM221CE16U NPN transistor outputs?
The TM221CE16U uses NPN sink-type transistor outputs, with a rated output voltage of 24 V DC and a maximum current of 0.5 A per point. When an output is activated, the internal transistor provides a current path to 0 V. In a typical circuit, the load is connected between the +24 V supply and the PLC output terminal. Unlike PNP source-type outputs, NPN outputs have a different current direction and common-terminal wiring arrangement. They cannot be wired in the same way as PNP outputs. Before commissioning, verify that the connected sensors, relay interfaces, and load input circuits are compatible with NPN switching. The total current through each output common must also remain within its rated limit.
3. Does the TM221CE16U support high-speed inputs and pulse outputs?
Yes. The controller provides four high-speed digital inputs for receiving pulse signals from encoders, pulse sensors, and proximity switches. Its Q0 and Q1 output channels support high-speed output functions for pulse-control applications. Depending on the configuration, these functions can be used for pulse accumulation, rotational speed monitoring, and communication with compatible drive equipment. During commissioning, engineers should verify the input signal frequency, output response requirements, wiring arrangement, and electrical characteristics of the connected devices. High-speed signal cables should be routed away from variable speed drives, motor power cables, and other sources of electromagnetic interference to reduce signal loss and false triggering.
4. Which sensors can be connected to the TM221CE16U analog inputs?
The TM221CE16U has two built-in analog input channels supporting 0–10 V DC signals with 10-bit resolution. These inputs are suitable for compatible industrial sensors and transmitters with voltage outputs, such as pressure sensors, level sensors, position sensors, and other voltage-based measuring devices. The PLC program can scale the acquired values into engineering units and use them for alarm processing, equipment interlocks, or control logic. It is important to remember that these are voltage inputs. A 4–20 mA current signal cannot be connected directly as though it were a 0–10 V signal. Before wiring, verify the sensor output type, signal range, and common-terminal arrangement. Proper shielding and noise protection should also be considered for analog signal cables.
5. How can the TM221CE16U communicate with an HMI or another PLC through Ethernet?
The TM221CE16U is equipped with a 10/100 Mbps Ethernet interface. It can connect to HMIs, supervisory computers, and other compatible controllers through an industrial Ethernet switch. The controller supports Modbus TCP, which can be used to read and write PLC data, exchange equipment status information, and support communication between automation devices. During configuration, assign the correct IP address and subnet mask to the PLC and connected devices, and confirm that they are on a compatible network. If communication fails, first inspect the Ethernet cable, switch ports, and network status indicators. Then check for IP address conflicts and verify that the target device has the appropriate Modbus TCP service enabled.
6. Which communication methods are available besides Ethernet?
In addition to Ethernet, the TM221CE16U provides a serial communication interface supporting RS-232 and RS-485. It can communicate with compatible HMIs, variable speed drives, instruments, and other serial devices. Supported protocols include Modbus RTU, Modbus ASCII, and SoMachine Network. For serial communication, configure the interface mode, baud rate, data bits, stop bits, parity, and device address according to the connected equipment. RS-485 networks also require attention to bus topology, termination resistors, and signal polarity. Incorrect wiring or excessive electrical interference can cause intermittent communication failures. The USB Mini-B interface is primarily used for PLC programming, program downloading, and maintenance.
7. Which expansion modules are compatible with the TM221CE16U?
The TM221CE16U supports Modicon TM3 series I/O expansion modules. These modules allow users to add digital inputs, digital outputs, or analog channels according to application requirements. The controller supports up to four local I/O expansion modules and up to 11 modules in a supported remote I/O architecture. Before expanding the system, verify module compatibility, the available 5 V DC and 24 V DC expansion bus power, and the total system power consumption. After installation, configure the expansion hardware in EcoStruxure Machine Expert – Basic. Check that all modules are recognized correctly and that the I/O address assignments match the physical wiring and application program.
8. How should input, output, or communication faults on the TM221CE16U be diagnosed?
Begin by checking whether the 24 V DC power supply is stable and inspecting the PWR, RUN, and ERR status indicators. If an input signal is not detected, check the sensor power supply, input common connection, signal polarity, and terminal wiring. If an output does not operate, confirm that the load is compatible with NPN sink-type switching, then inspect the load power supply, output current, and common-terminal connections. For high-speed signal problems, verify the assigned input or output channels, pulse frequency, cable shielding, and signal quality from the connected equipment. Ethernet communication faults should be investigated by checking the IP address, subnet configuration, network cable, and switch connection. For serial communication problems, inspect the RS-232 / RS-485 wiring, communication mode, and serial parameters. Using EcoStruxure Machine Expert – Basic to monitor I/O states, program execution, and diagnostic information can help determine whether the fault originates from field wiring, configuration settings, external equipment, or the PLC hardware.
Schneider TM221CE16U Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








