Schneider TM221CE24R Modicon M221 Logic Controller
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Description |
|---|---|
| Brand | Schneider Electric |
| Model | TM221CE24R |
| Product Series | Modicon M221 |
| Product Type | Logic Controller / PLC |
| Rated Supply Voltage | 100–240 V AC |
| Supply Voltage Range | 85–264 V AC |
| Supply Frequency | 50/60 Hz |
| Total Digital I/O | 24 points |
| Digital Inputs | 14 |
| Input Standard | IEC 61131-2 Type 1 |
| Input Voltage | 24 V DC |
| Input Logic | Sink / Source |
| High-Speed Digital Inputs | 4 channels |
| Analog Inputs | 2 channels |
| Analog Input Range | 0–10 V DC |
| Analog Input Resolution | 10-bit |
| Analog Input Conversion Time | 1 ms per channel + one controller cycle |
| Digital Outputs | 10 relay outputs |
| Output Type | Normally Open Relay |
| Relay Output Voltage | 5–125 V DC / 5–250 V AC |
| Maximum Output Current per Point | 2 A |
| Maximum Output Current per Common | COM 0: 7 A; COM 2: 4 A |
| Relay Output Response Time | Approximately 10 ms ON / 10 ms OFF |
| Local I/O Expansion | Up to 7 modules |
| Remote I/O Expansion | Up to 14 modules |
| Expansion Module Series | Modicon TM3 |
| Maximum Inrush Current | 40 A |
| Maximum Power Consumption | 35 VA without I/O expansion; 58 VA with maximum expansion configuration |
| Expansion Bus Power Supply | 5 V DC / 0.52 A; 24 V DC / 0.16 A |
| Ethernet Interface | 1 Ethernet port, 10/100 Mbps |
| Serial Communication Interface | 1 serial port, supporting RS-232 / RS-485 |
| USB Interface | USB Mini-B |
| Communication Protocols | Modbus TCP, Modbus RTU, Modbus ASCII, SoMachine Network |
| Program Memory | 256 kB Flash |
| Memory Card | SD card supported |
| Real-Time Clock | Built-in RTC |
| Programming Software | EcoStruxure Machine Expert – Basic |
| Mounting Method | 35 mm DIN rail or panel mounting |
| Protection Rating | IP20 |
| Dimensions | 90 × 70 × 110 mm |
| Weight | 0.395 kg |
FAQ
1. What industrial applications is the Schneider TM221CE24R designed for?
The Schneider Electric TM221CE24R is a 24-point logic controller from the Modicon M221 series, designed for small and medium-sized industrial automation systems. It integrates 14 digital inputs, 10 relay outputs, and 2 analog inputs, along with Ethernet and serial communication interfaces. Typical applications include packaging machinery, conveyor systems, automated assembly lines, pump control systems, and general-purpose production equipment. Its relay outputs can control compatible AC or DC loads, while the analog inputs collect voltage signals from field instruments. The built-in Ethernet and serial interfaces also support data exchange with HMIs, variable speed drives, and supervisory systems.
2. How are the digital inputs and outputs configured on the TM221CE24R?
The TM221CE24R provides 24 digital I/O points, consisting of 14 digital inputs and 10 relay outputs. The digital inputs operate with 24 V DC signals and comply with the IEC 61131-2 Type 1 standard. They support Sink and Source wiring configurations. Four input channels support high-speed signal acquisition and can be used with compatible encoders or pulse sensors. The output section uses normally open relay contacts to control contactors, relays, solenoid valves, and other industrial loads. During system design, the input signal types, response requirements, and output load characteristics should be considered to ensure correct wiring and channel configuration.
3. What are the main characteristics of the TM221CE24R relay outputs?
This controller features 10 normally open relay outputs, supporting load voltages of 5–125 V DC or 5–250 V AC, with a maximum current of 2 A per output point. One advantage of relay outputs is their ability to switch compatible AC and DC loads without the polarity restrictions associated with transistor outputs. Typical applications include controlling small contactor coils, solenoid valves, indicator lamps, and other industrial devices. However, relay contacts are mechanical components, so frequent switching can reduce their service life. For high-frequency switching applications or inductive loads, intermediate relays, contactors, or surge suppression components should be considered to protect the contacts from excessive inrush current and voltage spikes.
4. Does the TM221CE24R support high-speed inputs and encoder signal acquisition?
Yes. The controller provides four high-speed inputs for acquiring signals from compatible encoders, proximity switches, and pulse sensors. These inputs can be used for speed monitoring, pulse counting, position detection, and motion feedback in automated equipment. Compared with standard digital inputs, high-speed inputs are better suited to signals with higher switching frequencies. However, sensor output type, input filtering settings, and signal frequency must still be considered. Shielded cables are recommended for high-speed signal wiring. These cables should be routed separately from inverter and motor power cables to reduce electromagnetic interference that could cause incorrect counts or signal loss.
5. What analog signals can the TM221CE24R process?
The TM221CE24R has two built-in 0–10 V DC analog inputs with 10-bit resolution. The conversion time is 1 ms per channel plus one controller cycle. These inputs can connect to compatible voltage-output pressure sensors, level sensors, position sensors, and other industrial measuring instruments. The PLC can convert the acquired raw values into engineering units and use the measurements for alarms, interlocks, or equipment control. It is important to note that the built-in analog inputs are designed primarily for voltage signals. A 4–20 mA current signal should not be connected directly as though it were a 0–10 V signal. If the field instrument uses a current output, an appropriate signal converter or compatible analog input expansion module is required.
6. How does the TM221CE24R communicate with other automation devices through Ethernet?
The TM221CE24R integrates a 10/100 Mbps Ethernet interface and supports Modbus TCP communication. It can connect to compatible HMIs, industrial Ethernet switches, supervisory computers, and other PLCs. Through an Ethernet network, the controller can exchange register data, transmit operating status, and receive control commands. During configuration, the PLC must be assigned the correct IP address and subnet settings, and the target device must be accessible on the network. In addition to Ethernet, the controller provides an RS-232 / RS-485 serial interface for communication protocols such as Modbus RTU and Modbus ASCII. If communication is interrupted, check the network cable, switch ports, IP configuration, and communication parameters of the connected device.
7. Which I/O expansion modules are compatible with the TM221CE24R?
The TM221CE24R is compatible with Schneider Electric Modicon TM3 expansion modules. These modules can add digital inputs, digital outputs, or analog channels according to the application requirements. The controller supports up to 7 local I/O expansion modules and, within supported remote I/O architectures, up to 14 remote modules. Before expanding the system, verify module compatibility, bus power capacity, and total system power consumption to avoid exceeding the controller’s expansion limits. After installation, configure the hardware modules in EcoStruxure Machine Expert – Basic and check whether the PLC recognizes each expansion device correctly. I/O address allocation should also be verified to ensure that program variables correspond to the actual wiring locations.
8. How can operating failures, relay output problems, or communication faults on the TM221CE24R be diagnosed?
Troubleshooting should follow a systematic sequence covering the power supply, input signals, output circuits, communication settings, and program logic. First, verify that the AC supply is within the 85–264 V AC operating range and check the PWR, RUN, and ERR status indicators. If the PLC does not start normally, inspect the power wiring, program status, and diagnostic information. For input signal problems, check the 24 V DC sensor supply, input common terminals, signal polarity, and terminal connections. If a relay output does not operate, confirm that the program conditions are satisfied and inspect the relay contacts, external load supply, load current, and wiring. For Ethernet communication faults, verify the IP address, subnet settings, and network connection. For serial communication problems, check the RS-232 / RS-485 wiring, baud rate, parity, and device address. Using EcoStruxure Machine Expert – Basic to monitor PLC status, I/O variables, and diagnostic messages can help determine whether the fault originates from field devices, wiring, communication settings, or the controller hardware.
Schneider TM221CE24R Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








