Technical Specifications

FAQ

1. What is the main purpose of the 60X/EXD01-00-02 external display?
The 60X/EXD01-00-02 is a 10.4-inch external display designed for use with the Bently Nevada Orbit 60 Series machinery condition monitoring system. Its main purpose is to provide operators and maintenance personnel with a local interface for viewing monitoring information. Depending on the system configuration, the display can present system events, alarm events, module information, channel data, alarm status, and OK status. It is intended to make important machinery monitoring information easier to observe from an operator or maintenance location.

2. How does the 60X/EXD01-00-02 connect to an Orbit 60 system?
The external display is used as part of the Orbit 60 external display architecture. The display system communicates with the Orbit 60 System Interface Module through the associated industrial computer and Ethernet connection. During installation, engineers should verify the Ethernet connection, power supply, computer configuration, and communication with the Orbit 60 system. Once communication is established, the display should be checked to confirm that current measurement information, system status, and alarm information are being presented correctly.

3. What type of information can be displayed on the 60X/EXD01-00-02?
The display can present important information generated by the Orbit 60 machinery monitoring system. This can include system event lists, alarm event lists, module and channel data, alarm status, OK status, and configured monitoring information. The exact information available depends on the Orbit 60 hardware configuration and the software running on the associated industrial computer. During commissioning, the displayed information should be compared with the expected system configuration to ensure that all required channels and monitoring functions are available.

4. Is the 60X/EXD01-00-02 suitable for hazardous-area applications?
The 60X/EXD01-00-02 configuration uses the 10.4-inch hazardous-area display option with the multi-agency approval configuration covering CSA, ATEX, and IECEx. The actual installation must still follow the applicable certification requirements, enclosure requirements, wiring practices, and site hazardous-area classification. Engineers should verify that the complete installation, including the display, mounting arrangement, power supply, cables, and associated equipment, meets the requirements for the intended hazardous location rather than evaluating the display independently.

5. What power supply does the 60X/EXD01-00-02 require?
The display operates from a 24 V DC power supply. A suitable industrial DC power source should be used, with the voltage maintained within the equipment’s specified operating requirements. During commissioning, the supply voltage should be checked at the display connection point rather than only at the power supply output. If the display repeatedly resets, becomes unstable, or fails to start, the DC supply, wiring, terminal connections, and voltage drop should be checked before replacing the display.

6. What should be checked if the display does not show Orbit 60 monitoring data?
First verify that the display has the correct 24 V DC power supply and that it starts normally. Then check the Ethernet communication path between the associated industrial computer and the Orbit 60 System Interface Module. Network connections, communication configuration, software operation, and system status should be checked systematically. If the display is powered and operational but shows no monitoring information, the problem may be related to the industrial computer, communication configuration, or Orbit 60 system rather than the display itself. Checking whether other system functions are operating can help isolate the problem.

7. Can the 60X/EXD01-00-02 be used for machinery alarm monitoring?
Yes. The external display is intended to present Orbit 60 monitoring information, including alarm-related information. Operators can use the display to observe alarm events and the status of monitored channels or modules. During commissioning, alarm conditions should be tested according to the approved system procedure to confirm that the expected alarm information reaches the display. The displayed alarm status should correspond with the actual configured setpoints and monitoring logic. Any discrepancy should be investigated through the complete signal, configuration, communication, and display path.

8. What should be considered when installing and commissioning the 60X/EXD01-00-02?
Installation should take into account the selected mounting method, hazardous-area requirements, power supply, communication connections, and the location of the operator display. The display can be used with appropriate rack, panel, or independent mounting arrangements depending on the configuration. After installation, verify the 24 V DC supply and Ethernet communication, then confirm that the associated industrial computer and Orbit 60 system are operating correctly. Finally, check live monitoring information, channel data, alarm events, and system status. For hazardous-area installations, all certification and site-specific installation requirements should be verified before the system is placed into service.