Your Trusted PLC & DCS Supplier!
100% Original, Ready to Ship!

Schneider TM221CE16R Modicon M221 Logic Controller

  • Manufacturer: Schneider
  • Product Number: TM221CE16R
  • Condition: New & In Stock
  • Product Type: Modicon M221 Logic Controller
  • Origin: France
  • Payment Methods: T/T, Western Union
  • Dimensions: 90 × 70 × 95 mm
  • Weight: 0.346 kg
  • Shipping Port: Xiamen, China
  • Lead Time: 1-3 Working Days
  • Warranty: One Year
  • Certificate: COO
  • Courier partners: DHL, UPS, TNT, FedEx and EMS.

Product Detail

Contact Us

FAQS

Packing & Delivery

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China

Technical Specifications

Parameter Description
Brand Schneider Electric
Model TM221CE16R
Product Series Modicon M221
Product Type Logic Controller / PLC
Rated Supply Voltage 100–240 V AC
Supply Voltage Range 85–264 V AC
Supply Frequency 50/60 Hz
Total Digital I/O 16 points
Digital Inputs 9 points
Input Standard IEC 61131-2 Type 1
Input Voltage 24 V DC
Input Logic Sink / Source
High-Speed Inputs 4 channels, supporting high-speed counting
Analog Inputs 2 channels
Analog Input Range 0–10 V DC
Analog Input Resolution 10-bit
Analog Input Conversion Time 1 ms per channel + one controller cycle
Digital Outputs 7 relay outputs
Output Type Normally open relay
Relay Output Voltage 5–125 V DC / 5–250 V AC
Maximum Output Current per Point 2 A
Maximum Output Common Current COM 0: 7 A; COM 1: 6 A
Relay Mechanical Life Approximately 20,000,000 operations
High-Speed Counter Frequency Up to 100 kHz
Counter Resolution 32-bit
Maximum Local I/O Expansion 4 modules
Maximum Remote I/O Expansion 11 modules
Expansion Module Series Modicon TM3
Maximum Inrush Current 40 A
Maximum Power Consumption 33 VA without expansion modules; 49 VA with maximum expansion configuration
Expansion Bus Power Supply 5 V DC / 0.325 A; 24 V DC / 0.12 A
Ethernet Interface 1 Ethernet port, 10/100 Mbps
Serial Communication Interface 1 serial port, supporting RS-232 / RS-485
USB Interface USB Mini-B
Communication Protocols Modbus TCP, Modbus RTU, Modbus ASCII, SoMachine Network
Program Memory 256 kB flash memory
Memory Card SD card supported
Real-Time Clock Built-in RTC
Programming Software EcoStruxure Machine Expert – Basic
Mounting Type 35 mm DIN rail or panel mounting
Protection Rating IP20
Operating Temperature -10°C to +35°C
Dimensions 90 × 70 × 95 mm
Weight 0.346 kg

FAQ

1. What types of industrial applications is the Schneider TM221CE16R designed for?

The Schneider Electric TM221CE16R is a compact PLC from the Modicon M221 series, featuring 16 digital I/O points, two analog inputs, Ethernet connectivity, and serial communication capabilities. It is suitable for small and medium-sized machinery and automation systems, including packaging machines, conveyor equipment, automated assembly systems, pump stations, and material handling applications. Its relay outputs can control AC or DC loads that comply with the specified voltage and current ratings. The integrated Ethernet and serial communication interfaces also allow it to exchange data with HMIs, variable speed drives, and supervisory systems, making it a practical choice for machine-level automation.

2. How are the digital inputs and outputs configured on the TM221CE16R?

The controller provides 9 digital inputs and 7 relay outputs, giving a total of 16 digital I/O points. The digital inputs operate with 24 V DC signals and comply with the IEC 61131-2 Type 1 standard. They support sink and source wiring configurations. Some input channels support high-speed signal acquisition and can be used for encoder or pulse signal monitoring. The output section consists of normally open relay contacts, suitable for controlling contactors, relays, solenoid valves, and other loads within the specified output ratings. When assigning I/O points, engineers should consider the signal type, switching frequency, and electrical characteristics of the connected field devices.

3. What types of loads can the TM221CE16R relay outputs control?

The TM221CE16R is equipped with seven normally open relay outputs. They support output voltages from 5–250 V AC or 5–125 V DC, with a maximum current of 2 A per point. These relay contacts can control both AC and DC loads, including small contactor coils, indicator lamps, solenoid valves, and other industrial control devices. Unlike transistor outputs, relay outputs are not restricted to a specific DC switching polarity, making them suitable for a wider range of switching applications. However, actual load capacity also depends on the load type, inrush current, power factor, and electrical contact life. For frequent switching or larger inductive loads, an intermediate relay or suitable surge-suppression device should be considered.

4. Does the TM221CE16R support high-speed counting?

Yes. The TM221CE16R provides four high-speed inputs that can be configured for high-speed counter functions. The maximum counting frequency can reach 100 kHz, and the counter supports 32-bit operation. These inputs can receive signals from compatible encoders, proximity switches, and other pulse-generating devices. Typical applications include rotational speed monitoring, pulse accumulation, position detection, and machine operating status monitoring. When configuring high-speed counting, engineers should select the correct wiring method according to the sensor output type and verify the input filter settings, signal frequency, and cable quality. Shielded cables are recommended for high-speed pulse signals, and they should be routed away from variable speed drive output cables and other sources of electrical interference.

5. What analog signals can the TM221CE16R receive?

The TM221CE16R includes two built-in analog input channels supporting 0–10 V DC signals, with 10-bit resolution. The conversion time is 1 ms per channel plus one controller cycle. These inputs can acquire measurement signals from compatible voltage-output pressure sensors, level sensors, position sensors, and other industrial instruments. The PLC program can scale the raw input values into engineering units and use the results for alarms, interlocks, or equipment adjustment. It is important to note that these are voltage inputs and do not directly support every type of 4–20 mA current-output transmitter. If the field instrument provides a current signal, an appropriate signal converter or compatible analog input module is required.

6. How can the TM221CE16R connect to Ethernet devices, and which communication protocols does it support?

The TM221CE16R has an integrated 10/100 Mbps Ethernet interface. It can connect to compatible HMIs, industrial switches, supervisory computers, and other automation devices through an Ethernet network. The controller supports Modbus TCP for data exchange and status monitoring between PLCs and networked equipment. It also provides a serial communication interface supporting RS-232 or RS-485 for applications using Modbus RTU and Modbus ASCII. When configuring network communication, engineers should verify the IP address, subnet settings, communication protocol, and device address. If network communication is interrupted, check the Ethernet cable, switch port, and network parameters before investigating the PLC and connected device configurations.

7. Which expansion modules are compatible with the TM221CE16R?

The TM221CE16R is compatible with Schneider Electric Modicon TM3 expansion modules. These modules allow users to increase the number of digital inputs, digital outputs, or analog channels according to application requirements. Its expansion capacity depends on whether a local or remote I/O architecture is used. The exact number and combination of modules must be checked against the system configuration and hardware compatibility requirements. Before installation, verify the module models, expansion bus power capacity, and total power consumption to ensure that the controller’s expansion power limits are not exceeded. After installation, configure the hardware in EcoStruxure Machine Expert – Basic and confirm that all modules are correctly recognized. For larger systems, I/O addresses should also be planned in advance to maintain consistency between the program variables and physical terminals.

8. How should the TM221CE16R be troubleshot if it fails to run, has output problems, or loses communication?

Begin by checking whether the AC power supply is within the permitted range of 85–264 V AC, and inspect the controller’s PWR, RUN, and ERR indicators. If the PLC does not enter normal operating mode, check the power wiring, program status, and diagnostic messages. For input signal problems, inspect the 24 V DC sensor supply, input common connections, signal polarity, and field wiring. If a relay output fails to operate, check the program logic, output status, external load power supply, contact wiring, and load current. For Ethernet communication faults, verify the IP address, subnet configuration, network cable, and switch connection. For serial communication problems, check the RS-232 / RS-485 wiring, baud rate, parity settings, and device address. Using EcoStruxure Machine Expert – Basic to monitor the PLC status, I/O variables, and program execution can help narrow down the fault and determine whether it originates from external equipment, wiring, configuration, or the controller itself.

Schneider TM221CE16R Modicon M221 Logic Controller is in stock. Please contact us for a quick quote and competitive pricing.

Company Information
e-mail [email protected]
Mobile +8613666084105
Whatsapp +8613666084105
WeChat 13666084105
Add to Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China


Company Introduction

Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.

We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.

Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.

Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia

Our Mission

Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.

Does this product come with a warranty?

We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.

How to Verify Products Before Purchase?

We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.

How long does shipping take?

Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.

What is the minimum order quantity (MOQ)?

The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.

Can I get discounts for bulk purchases of products?

Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.

What payment methods do you accept for wholesale orders?

We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.

Can I purchase different quantities of a product?

Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.

Are there any discounts or promotions available for new wholesale customers?

We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.

When purchasing a product, how can I ensure compatibility with my existing systems?

If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.

Can I return the goods I received if they do not meet our requirements?

Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.

Do you provide technical support or installation services to wholesale customers?

Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.

Hot Tags :

 

Prev or Next:

Send Us An Inquiry


Write your inquiry here and send it to us

Send Us An Inquiry


No:86996