ABB FSO-21 3AXD50000023987 Safety Function Module
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Model | FSO-21 |
| Ordering Number | 3AXD50000023987 |
| Product Type | Safety Function Module |
| Product Category | Drive Functional Safety Module |
| Product Series | ABB FSO Series |
| Compatible Drive Series | ABB ACS880 |
| Main Function | Expands the functional safety capabilities of compatible ABB drives |
| Communication Interface | Safety-related digital input/output connections |
| Safety Functions | SS1, SSE, SBC, SLS, SMS, POUS, SDI, SSM |
| Number of Safety Functions | 8 |
| Safety Level Capability | SIL 3 / PL e |
| Safety Certification | TÜV Nord |
| Encoder Compatibility | Supports FSE-31 Pulse Encoder Interface Module |
| Encoder-dependent Functions | SDI and SSM |
| Configuration Software | ABB Drive Composer Pro |
| Power Supply | 24 V DC |
| Digital Inputs | 4 redundant or 8 single-channel inputs, or a combination |
| Digital Outputs | 3 redundant or 6 single-channel outputs, or a combination |
| Input Signal Type | 24 V DC |
| Output Signal Type | 24 V DC |
| Communication Expansion | PROFIsafe over PROFINET with compatible FPNO-21 configuration |
| Installation Type | Internal plug-in installation |
| Typical Applications | Machine safety, motor control, industrial automation, and safety monitoring |
| Dimensions | 111 × 38 × 76 mm |
| Weight | 0.98 kg |
FAQ
1. What is the main function of the ABB FSO-21 Safety Function Module?
The ABB FSO-21 is a functional safety module designed to extend the safety capabilities of compatible ABB ACS880 variable frequency drives. It monitors safety-related signals from external devices and coordinates the execution of configured safety functions through the drive system. The module does not directly control motor operation; instead, it supervises safety conditions and requests the appropriate safety response when necessary. If the drive cannot execute the required safety command, the system can initiate Safe Torque Off (STO) to prevent hazardous motor operation. This makes the FSO-21 suitable for industrial machinery requiring integrated drive safety protection.
2. Which safety functions are supported by the FSO-21?
The FSO-21 supports eight safety functions designed for different industrial machine protection requirements:
-
SS1 – Safe Stop 1: Controls motor deceleration before activating torque removal.
-
SSE – Safe Stop Emergency: Provides an emergency stopping function.
-
SBC – Safe Brake Control: Controls and monitors safety-related mechanical brake operations.
-
SLS – Safely-Limited Speed: Prevents motor speed from exceeding a configured safe limit.
-
SMS – Safe Maximum Speed: Monitors the maximum permitted motor speed.
-
POUS – Prevention of Unexpected Start-up: Prevents unintended machine restart.
-
SDI – Safe Direction: Monitors whether the motor moves in the permitted direction.
-
SSM – Safe Speed Monitor: Provides safety-related speed monitoring.
SDI requires the appropriate FSE-31 encoder interface configuration. These functions allow engineers to design safety solutions according to individual machine requirements.
3. Which ABB variable frequency drives are compatible with the FSO-21?
The FSO-21 is primarily designed for compatible ABB ACS880 industrial drive systems. It can be integrated into supported drive configurations to provide additional functional safety capabilities. However, compatibility depends on the specific drive model, control unit, hardware revision, and firmware version. Some configurations require particular control board revisions or additional accessories. Before installation, technicians should check the drive identification information and the applicable ABB compatibility documentation. This is especially important when replacing an existing safety module or upgrading an operating drive system.
4. Does the FSO-21 support encoder feedback?
Yes. The FSO-21 supports encoder-based safety functions when used with the ABB FSE-31 pulse encoder interface module and a compatible encoder. Encoder feedback provides information about motor speed and rotational direction, allowing the safety system to perform additional motion monitoring. This configuration is particularly useful for applications requiring Safe Direction (SDI) and Safe Speed Monitor (SSM). During installation, technicians should verify encoder compatibility, signal wiring, interface configuration, and feedback accuracy. Incorrect encoder configuration may affect safety monitoring performance, so the complete feedback system must be tested before the machine enters normal operation.
5. What safety certification and performance levels does the ABB FSO-21 support?
The ABB FSO-21 supports functional safety applications with SIL 3 and PL e capability and has TÜV Nord certification. These performance levels make it suitable for demanding industrial machinery applications where reliable safety monitoring and controlled stopping are essential. However, the safety performance of the complete machine depends on the entire safety-related control system, including external sensors, emergency stop devices, wiring, safety logic, drive functions, and mechanical components. Engineers must perform an appropriate risk assessment, configure the safety functions correctly, and validate the complete safety system according to the applicable standards.
6. How is the FSO-21 configured and commissioned?
The FSO-21 is configured using ABB Drive Composer Pro software. During commissioning, engineers select the required safety functions, define operating parameters, configure safety inputs and outputs, and verify the associated drive settings. External safety devices, such as emergency stop buttons, safety gates, and other protective equipment, must be connected according to the approved electrical design. If encoder-based functions are required, the FSE-31 interface and encoder feedback must also be configured correctly. After configuration, each safety function should undergo functional testing and validation. The final configuration should be documented to support future maintenance and safety inspections.
7. What should be checked if the FSO-21 reports a safety-related fault?
When a safety-related fault occurs, technicians should first identify the fault information through the drive diagnostics or ABB Drive Composer Pro software. Check the status of safety inputs and outputs, emergency stop circuits, safety gate switches, and external protective devices. If encoder feedback is used, inspect the FSE-31 interface, encoder wiring, signal quality, and configuration parameters. The compatibility of the module with the installed drive hardware and firmware should also be verified. After identifying and correcting the cause, follow the manufacturer’s reset procedure and repeat the required safety function tests. Never bypass safety circuits or force a reset without understanding the underlying fault.
8. What precautions should be taken when installing or replacing the FSO-21 module?
Before installing or replacing the FSO-21, verify the model designation and ordering number 3AXD50000023987. Confirm that the target ACS880 drive supports the module and that the control unit and firmware meet the applicable requirements. Disconnect the power supply and follow the manufacturer’s electrical safety procedures, including the required discharge waiting time for the drive’s DC bus. Install the module in the designated option slot and connect all safety signals according to the approved wiring diagrams. After installation, configure the safety functions using Drive Composer Pro and perform the required functional safety validation. The equipment should only return to service after all safety functions have been tested and confirmed to operate correctly.
ABB FSO-21 3AXD50000023987 Safety Function Module is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








