ABB NSD570 1KHW000600R0001 Remote Protection Device
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | NSD570 |
| Order Number | 1KHW000600R0001 |
| Product Type | Remote Protection Device |
| Product Category | Power System Protection Communication Equipment |
| Product Series | ABB NSD570 |
| Main Function | Remote Protection Signal Transmission |
| Application | High-Voltage Transmission Line Protection, Substation Protection, Power System Communication |
| System Architecture | Modular Design |
| Mounting Type | 19-inch Rack Mounting |
| Rack Height | 4U |
| Communication Methods | Analog, Digital and Optical Fiber Communication |
| Network Interface | Ethernet/IP |
| Serial Communication Interfaces | G.703, RS-422, V.11, X.21 |
| Protection Signal Types | Blocking, Permissive Tripping, Direct Transfer Tripping |
| Maximum Protection Commands | Up to 16 per rack, depending on configuration |
| Power Supply Type | AC/DC |
| DC Input Voltage | 110–250 V DC |
| AC Input Voltage | 100–240 V AC |
| Operating Frequency | 50/60 Hz |
| Protection Functions | Remote Tripping, Protection Signal Transmission, Channel Monitoring |
| Communication Monitoring | Channel Quality, Communication Status and Delay Monitoring |
| Dimensions | 485 × 177 × 300 mm |
| Weight | 6 kg |
FAQ
Q1: What is the main function of the ABB NSD570 1KHW000600R0001 Remote Protection Device?
A: The ABB NSD570 is a remote protection communication device designed for power transmission and substation protection systems. Its primary function is to transmit protection commands between substations or between the two ends of a transmission line. When a short circuit, ground fault or another abnormal electrical condition occurs, the protection relay generates a corresponding signal. The NSD570 transfers this command to the remote terminal, allowing protection systems at both ends to coordinate their actions. It supports protection signaling functions such as blocking, permissive tripping and direct transfer tripping, helping reduce fault-clearing time and improve the reliability and selectivity of transmission line protection.
Q2: Which remote protection signals does the ABB NSD570 support?
A: The NSD570 supports several types of protection commands commonly used in transmission line protection schemes. These include Blocking, Permissive Tripping and Direct Transfer Tripping. Blocking signals are used to prevent unnecessary tripping under specific protection conditions. Permissive tripping signals allow a remote protection relay to execute a trip command when the required local protection conditions are also satisfied. Direct transfer tripping sends a trip command directly to the remote terminal. These functions can be configured according to the protection philosophy and operating requirements of the electrical network.
Q3: Which communication interfaces and transmission methods are supported by the ABB NSD570?
A: The NSD570 features a modular communication architecture that allows different line interfaces to be selected according to the application. Depending on the installed interface modules, it can support analog communication, digital communication and optical fiber communication. Available digital interface standards may include G.703, RS-422, V.11 and X.21. Ethernet-based communication is also available in suitable configurations. Each interface has different transmission characteristics and connection requirements. During equipment selection or replacement, engineers should verify the communication interface type, transmission rate, channel characteristics and compatibility between the local and remote terminals.
Q4: Can the ABB NSD570 be used for high-voltage transmission line protection?
A: Yes. One of the main applications of the NSD570 is remote protection communication for high-voltage transmission lines. In transmission systems with power sources at both ends or multiple feeding points, local protection relays may not always have sufficient information about electrical conditions at the remote end. The NSD570 transfers essential protection commands between terminals, allowing the protection relays to coordinate their operation according to predefined logic. This helps accelerate fault detection and isolation, reduce the duration of electrical disturbances and limit the impact of transmission line faults on other equipment and overall grid stability.
Q5: Does the ABB NSD570 support Ethernet/IP communication?
A: Ethernet/IP communication is available in NSD570 configurations equipped with the appropriate network interface module, such as the G3LE Ethernet WAN Interface. This interface can transmit multiple independent protection commands over an Ethernet/IP network and provide communication status monitoring and alarm functions. Depending on the configuration, electrical Ethernet connections or optical fiber connections through SFP modules may also be used. However, Ethernet/IP capability should not be assumed for every basic NSD570 configuration. Before upgrading or replacing the equipment, engineers should verify the installed interface module, network settings and compatibility with the remote communication terminal.
Q6: How can communication failures affecting protection signal transmission be diagnosed on the ABB NSD570?
A: When the NSD570 fails to transmit protection signals correctly, troubleshooting should focus on the communication link, interface modules and protection logic. First, inspect the communication cables, optical fibers and connectors between the local and remote terminals for physical damage, loose connections or contamination. Next, examine the operating status of the line interface modules, channel quality indicators and communication alarms. Confirm that the communication parameters and interface configurations at both ends are consistent. Finally, check the protection command input and output mapping, relay interfaces and associated logic settings. If the communication link is operating normally but commands are still not transmitted correctly, further inspection of the interface modules and control circuits may be necessary. Testing should be performed by qualified protection engineers.
Q7: Does the ABB NSD570 support redundant power supplies and multiple protection channels?
A: The NSD570 uses a modular architecture that allows power supply modules, line interface modules and protection relay interface modules to be selected according to the system design. Certain configurations support redundant power supply arrangements, improving equipment availability and reducing the impact of a single power supply failure. Multiple protection interfaces and communication modules can also be installed to support different protection commands and communication channels. The actual number of channels, interface combinations and redundancy arrangements depend on the rack configuration and installed modules. During system engineering, the configuration should be selected according to the number of protected circuits, communication requirements and power network operating conditions.
Q8: What should be checked when replacing an ABB NSD570 1KHW000600R0001 Remote Protection Device?
A: Before replacing an NSD570, engineers should verify the complete model designation and order number to ensure that the replacement matches the existing hardware configuration. The power supply requirements, including AC or DC input specifications, must also be checked. Particular attention should be given to the installed analog, digital, optical fiber or Ethernet/IP communication interfaces. In addition, protection relay interface quantities, command input and output mapping, remote terminal settings and communication parameters should be reviewed. After installation, the replacement unit must undergo communication link verification, protection command transmission testing and end-to-end functional testing. Blocking and tripping signals should be tested according to the approved protection scheme to ensure correct operation before the equipment is returned to service.
ABB NSD570 1KHW000600R0001 Remote Protection Device is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








