Schneider MVS06N Contactor
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Product Series | EasyPact MVS |
| Product Type | Air Circuit Breaker |
| Model Series | MVS06N |
| Rated Current | 630 A |
| Number of Poles | 3P / 4P |
| Rated Operational Voltage | 440 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Frequency | 50/60 Hz |
| Rated Ultimate Short-Circuit Breaking Capacity | 50 kA (220–440 V AC) |
| Rated Service Short-Circuit Breaking Capacity | 50 kA |
| Utilization Category | Category B |
| Rated Short-Circuit Making Capacity | 75 kA |
| Mounting Type | Fixed / Draw-out |
| Operating Mechanism | Manual or Electrical |
| Protection Functions | Long-time, short-time, instantaneous and ground-fault protection, depending on trip unit |
| Applicable Standard | IEC 60947-2 |
| Dimensions | 301 × 276 × 196 mm |
| Weight | 14 kg |
FAQ
Q1: What is the main function of the MVS06N in an industrial power distribution system?
The MVS06N is designed to provide circuit switching and electrical protection in low-voltage power distribution systems. Its primary functions include protecting electrical circuits against overloads and short circuits while allowing operators to control power supply to connected equipment. When an abnormal current condition occurs, the trip unit detects the fault and initiates a tripping operation to disconnect the affected circuit. This helps reduce the risk of damage to motors, cables, transformers, switchgear and other downstream electrical equipment. It can be used in industrial distribution panels, power control cabinets and other applications requiring reliable circuit protection.
Q2: What is the rated current of the MVS06N?
The rated current is 630 A. This rating indicates the current capacity class of the circuit breaker under specified operating conditions. When selecting the equipment, engineers should consider the actual load current, ambient temperature, installation environment, cable capacity and the characteristics of downstream equipment. The rated current should be coordinated with the overall distribution system to prevent unnecessary tripping and ensure adequate protection. It is also important to verify the exact product configuration and associated trip unit before installation.
Q3: What is the short-circuit breaking capacity of the MVS06N?
The rated ultimate short-circuit breaking capacity is specified as 50 kA at 220–440 V AC. This value represents the maximum prospective short-circuit current that the circuit breaker can interrupt under specified test conditions. During system design, engineers must calculate or obtain the prospective short-circuit current at the installation point and compare it with the breaker’s breaking capacity. The selected circuit breaker must be suitable for the actual fault level of the electrical network. Proper coordination with upstream and downstream protection devices is also necessary to minimize unnecessary power interruptions.
Q4: Which protection functions are available for this circuit breaker?
The available protection functions depend on the installed electronic trip unit and product configuration. Depending on the configuration, protection may include long-time overload protection, short-time short-circuit protection, instantaneous short-circuit protection and ground-fault protection. Long-time protection helps prevent overheating caused by sustained overload conditions. Short-time protection provides a controlled delay to support protection coordination, while instantaneous protection responds rapidly to high-level fault currents. Ground-fault protection can help detect abnormal current flowing through the grounding path. Correct adjustment of these protection settings is essential for reliable operation and coordination with other protective devices.
Q5: Can the MVS06N operate in both 50Hz and 60Hz electrical systems?
The specified frequency range is 50/60 Hz, making the series suitable for applications in electrical networks using either frequency. Before installation, engineers should verify the rated operational voltage, system frequency, pole configuration and electrical connection requirements. They should also consider the grounding arrangement and the characteristics of the connected loads. For international industrial projects, checking the complete model number and applicable technical documentation is important because different configurations may have different operating characteristics and accessories.
Q6: What is the difference between fixed-type and draw-out-type installation?
A fixed-type circuit breaker is mounted directly inside the switchgear cabinet. Its electrical connections are generally permanent, making it suitable for installations where routine removal is not a major maintenance requirement. A draw-out-type circuit breaker is installed in a dedicated cradle, allowing the breaker body to be moved between connected, test and disconnected positions, depending on the design. This arrangement simplifies inspection, maintenance and replacement without requiring the complete switchgear assembly to be dismantled. Draw-out configurations are particularly useful in industrial facilities where equipment availability and maintenance flexibility are important. The two installation types require different mounting arrangements and accessories, so compatibility must be confirmed before replacement.
Q7: What inspections should be completed before commissioning the MVS06N?
Before commissioning, technicians should verify the complete model designation, rated current, pole configuration, trip unit and operating mechanism. The circuit breaker and switchgear assembly should be inspected for mechanical damage, contamination, loose connections and signs of overheating. Electrical connections, busbar joints and grounding arrangements must be checked carefully. The installation should also be inspected to ensure that clearances and insulation conditions meet the applicable requirements. Before energizing the equipment, qualified personnel should perform appropriate insulation checks, mechanical opening and closing tests, trip unit setting verification and auxiliary contact function tests. Protection settings should be coordinated with the electrical system design to ensure reliable fault detection and isolation.
Q8: What are the common causes of unexpected tripping during operation?
Unexpected tripping can result from several electrical or mechanical conditions. Common causes include sustained overloads, short circuits, ground faults, excessive motor starting currents and incorrectly configured protection settings. A long-time trip may occur when the load current remains above the configured threshold for an extended period. Short-time or instantaneous protection may operate when a high fault current is detected. Loose electrical connections, abnormal operating temperatures and unsuitable coordination between upstream and downstream protective devices may also contribute to unwanted trips. Troubleshooting should begin by checking the trip indication and identifying the protection function that initiated the operation. Technicians should then measure the actual load current, inspect the electrical connections and verify the trip unit settings. The underlying fault must be identified and corrected before the circuit breaker is reset and returned to service. Repeatedly resetting the breaker without investigating the cause may result in further equipment damage or electrical hazards.
Schneider MVS06N Contactor is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








