Schneider MVS08N Contactor
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Product Series | EasyPact MVS |
| Model | MVS08N |
| Product Type | Air Circuit Breaker (ACB) |
| Rated Current | 800 A |
| Number of Poles | 3P / 4P |
| Pole Protection | 3P 3d |
| Rated Operational Voltage | 690 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Frequency | 50/60 Hz |
| Rated Ultimate Short-Circuit Breaking Capacity | 50 kA |
| Rated Service Short-Circuit Breaking Capacity | 50 kA |
| Utilization Category | Category B |
| Trip Unit | ET2I / ET5S / ET6G |
| Trip Technology | Electronic |
| Protection Functions | Long-time, short-time, instantaneous and ground-fault protection |
| Mounting Type | Fixed / Draw-out |
| Operating Mechanism | Manual / Electrical |
| Connection Position | Rear Connection |
| Connection Orientation | Horizontal / Vertical |
| Protection Rating | IP40 |
| Pollution Degree | 4 |
| Operating Temperature | -5 to 70°C |
| Storage Temperature | -40 to 85°C or -25 to 85°C, depending on control unit |
| Maximum Breaking Time | 25 ms |
| Maximum Closing Response Time | 70 ms |
| Applicable Standard | IEC 60947-2 |
| Dimensions | 352 × 422 × 297 mm |
| Weight | 40 kg |
FAQ
Q1: What is the main function of the MVS08N in an industrial power distribution system?
The MVS08N is designed for switching, isolation and electrical protection in low-voltage industrial power distribution systems. As an air circuit breaker, it protects electrical circuits against overloads and short circuits by monitoring current conditions and disconnecting the affected circuit when a fault occurs. It can be installed in main distribution panels, industrial switchgear assemblies and power distribution cabinets. In large facilities, it is commonly used for incoming power protection, busbar protection coordination and outgoing feeder applications. Its 800 A rated current makes it suitable for distribution circuits with relatively high current requirements.
Q2: What are the rated current and operating voltage of the MVS08N?
The MVS08N has a rated current of 800 A at an ambient reference temperature of 40°C. Its rated operational voltage is 690 V AC, and it supports both 50 Hz and 60 Hz power systems. These electrical ratings allow it to be used in various industrial distribution applications. During selection, engineers should consider the actual load current, cable capacity, busbar specifications, ambient temperature and installation conditions. The rated current of the breaker should be coordinated with the load requirements and the protection characteristics of the complete electrical system. The exact pole configuration and trip unit rating should also be verified before installation.
Q3: What is the short-circuit breaking capacity of the MVS08N?
The MVS08N has a rated ultimate short-circuit breaking capacity of 50 kA at 220–440 V AC. Its rated service short-circuit breaking capacity can reach 50 kA at the same voltage range, depending on the specific configuration. This capability allows the circuit breaker to interrupt substantial fault currents under specified operating conditions. Before installation, engineers should calculate the prospective short-circuit current at the installation point and compare it with the breaker’s rated breaking capacity. Proper coordination with upstream and downstream circuit breakers is also important to ensure selective protection and reduce unnecessary interruptions to other parts of the electrical network.
Q4: Which protection functions are available on the MVS08N?
The MVS08N can be equipped with different electronic trip units, including ET2I, ET5S and ET6G configurations. Depending on the selected trip unit, protection functions may include long-time overload protection, short-time short-circuit protection, instantaneous short-circuit protection and ground-fault protection. Long-time protection prevents damage caused by sustained overload conditions, while short-time protection helps coordinate the operation of upstream and downstream protective devices. Instantaneous protection responds rapidly to severe short-circuit currents. Ground-fault protection provides additional protection against abnormal current leakage paths. The actual adjustment ranges and available functions must be confirmed according to the installed trip unit.
Q5: What is the difference between fixed and draw-out MVS08N configurations?
The fixed version is mounted directly inside the switchgear cabinet, with electrical connections remaining in a permanent position. This configuration is suitable for applications where straightforward installation and a stable connection arrangement are preferred. The draw-out version uses a dedicated chassis that allows the breaker to move between connected, test and disconnected positions. This design makes inspection, maintenance and replacement more convenient, particularly in industrial facilities where continuous power availability is important. Draw-out configurations may also support mechanical interlocking and position locking features, depending on the selected accessories. When replacing an existing unit, the installation type and chassis compatibility should be checked carefully.
Q6: What should be considered when selecting an electronic trip unit for the MVS08N?
The selection of an electronic trip unit should be based on the protection requirements of the electrical distribution system. Engineers need to evaluate the load characteristics, rated current, prospective short-circuit current and coordination requirements with other circuit breakers. Different trip unit configurations provide different protection functions and adjustment capabilities. For example, a basic protection configuration may be sufficient for standard feeder applications, while a more advanced configuration may be preferred when ground-fault protection and more detailed protection adjustments are required. The trip unit rating must also match the circuit breaker configuration. Incorrect protection settings can cause unnecessary tripping or insufficient fault protection.
Q7: What inspections should be performed before commissioning the MVS08N?
Before commissioning, technicians should verify the complete model designation, rated current, pole configuration, trip unit type and installation arrangement. The circuit breaker should be inspected for mechanical damage, contamination, corrosion and abnormal wear. All busbar connections, cable terminals and grounding connections must be checked to ensure reliable electrical contact. For draw-out models, the connected, test and disconnected positions should be inspected, and the operating mechanism should move smoothly. After installation, qualified personnel should perform appropriate insulation checks, mechanical opening and closing tests, auxiliary contact verification and electronic trip unit setting checks. Protection parameters must be coordinated with the actual electrical system before the equipment is energized.
Q8: Why does the MVS08N trip unexpectedly during normal operation?
Unexpected tripping may be caused by overload conditions, short circuits, ground faults, incorrect trip unit settings or problems with the connected electrical equipment. A sustained current above the long-time protection threshold may activate overload protection, while a sudden increase in current can trigger short-time or instantaneous protection. Loose busbar connections, excessive contact resistance and abnormal load startup currents may also contribute to operating problems. During troubleshooting, technicians should first identify the trip indication and determine which protection function has operated. They should then measure the actual load current, inspect the electrical connections and check the electronic trip unit settings. If an external fault is detected, it must be corrected before resetting the circuit breaker. Repeatedly closing the breaker without identifying the underlying cause should be avoided because it may lead to further equipment damage or electrical hazards.
Schneider MVS08N Contactor is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








