Schneider MVS10N Contactor
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||

Technical Specifications
| Parameter | Specification |
|---|---|
| Product Series | EasyPact MVS |
| Model | MVS10N |
| Product Type | Air Circuit Breaker (ACB) |
| Application | Power Distribution |
| Rated Current | 1000 A |
| Number of Poles | 3P |
| Protected Poles | 3P 3d |
| Rated Operational Voltage | 690 V AC |
| Rated Insulation Voltage | 1000 V AC |
| Rated Impulse Withstand Voltage | 12 kV |
| Rated Frequency | 50/60 Hz |
| Breaking Capacity Code | N |
| Rated Ultimate Short-Circuit Breaking Capacity | 50 kA |
| Rated Service Short-Circuit Breaking Capacity | 50 kA |
| Rated Short-Circuit Making Capacity | 105 kA |
| Utilization Category | Category B |
| Trip Unit | ET2I / ET5S / ET6G |
| Trip Unit Technology | Electronic |
| Protection Functions | Overload and instantaneous short-circuit protection; additional functions depend on trip unit |
| Mounting Type | Fixed / Draw-out |
| Operating Mechanism | Manual / Electrical |
| Connection Position | Rear Connection |
| Connection Orientation | Horizontal / Vertical |
| Isolation Function | Suitable for Isolation |
| Maximum Breaking Time | 25 ms |
| Maximum Closing Response Time | 70 ms |
| Protection Rating | IP40 |
| Pollution Degree | 4 |
| Operating Temperature | -5 to 70°C |
| Storage Temperature | -40 to 85°C without control unit; -25 to 85°C with control unit |
| Applicable Standard | IEC 60947-2 |
| Dimensions | 439 × 441 × 395 mm |
| Weight | 70 kg |
FAQ
Q1: What is the main function of the MVS10N in an industrial power distribution system?
The MVS10N is designed for switching, isolation and protection in low-voltage industrial power distribution systems. As an air circuit breaker, it protects electrical circuits against overloads and short circuits by detecting abnormal current conditions and disconnecting the affected circuit when necessary. With a rated current of 1000 A, it is suitable for industrial distribution cabinets, main incoming feeders, power control panels and large electrical distribution networks. It can also be used in applications where reliable circuit isolation and coordination between multiple protection devices are required.
Q2: What are the rated current and operating voltage of the MVS10N?
The MVS10N has a rated current of 1000 A at an ambient reference temperature of 40°C. Its rated operational voltage is 690 V AC, and it supports both 50 Hz and 60 Hz electrical systems. These characteristics make it suitable for various industrial power distribution applications. During selection, engineers should evaluate the actual load current, system voltage, ambient temperature, cable capacity and busbar specifications. The circuit breaker’s rated current must be coordinated with the connected electrical equipment to ensure reliable operation. The exact pole configuration and electronic trip unit should also be confirmed before installation.
Q3: What is the short-circuit breaking capacity of the MVS10N?
The MVS10N has a rated ultimate short-circuit breaking capacity of 50 kA at 220–440 V AC. Its rated service short-circuit breaking capacity is also 50 kA within this voltage range. The rated short-circuit making capacity is 105 kA. These values indicate the circuit breaker’s ability to withstand and interrupt high fault currents under specified test conditions. Before installation, engineers should calculate the prospective short-circuit current at the installation point and confirm that the breaking capacity is sufficient for the electrical network. Proper coordination with upstream and downstream circuit breakers is also necessary to minimize unnecessary power interruptions.
Q4: Which protection functions are available on the MVS10N?
The MVS10N can be equipped with different electronic trip units, including ET2I, ET5S and ET6G, depending on the product configuration. The available protection functions vary according to the installed trip unit. Basic protection may include long-time overload protection and instantaneous short-circuit protection, while more advanced configurations can provide short-time protection and additional monitoring functions. Long-time protection prevents damage caused by sustained overloads, while instantaneous protection responds rapidly to high short-circuit currents. Engineers should verify the complete trip unit designation before commissioning to determine the available protection functions and adjustment ranges.
Q5: What is the difference between fixed and draw-out MVS10N configurations?
The fixed version is mounted directly inside the switchgear cabinet, with electrical connections remaining in a permanent position. It is suitable for installations where a straightforward mounting arrangement and stable electrical connections are preferred. The draw-out version uses a dedicated chassis that allows the circuit breaker to move between connected, test and disconnected positions. This design makes inspection, maintenance and replacement more convenient. Draw-out configurations may also support mechanical interlocking and locking accessories to improve operational safety. When replacing an existing circuit breaker, technicians should verify the mounting type, chassis compatibility, connection arrangement and accessory configuration.
Q6: How should the electronic trip unit of the MVS10N be configured?
The electronic trip unit should be configured according to the electrical characteristics and protection requirements of the distribution system. Important settings include the long-time current pickup, long-time delay and instantaneous short-circuit pickup. Depending on the installed trip unit, short-time protection settings may also be available. These parameters determine how quickly the circuit breaker responds to different fault conditions. For systems containing multiple protective devices, engineers should perform protection coordination to ensure that the appropriate circuit breaker operates first when a fault occurs. Incorrect settings may cause unnecessary tripping or insufficient protection. All adjustments should be performed by qualified electrical personnel.
Q7: What inspections should be performed before commissioning the MVS10N?
Before commissioning, technicians should verify the complete model number, rated current, pole configuration, trip unit and mounting arrangement. The circuit breaker should be inspected for mechanical damage, corrosion, contamination and abnormal wear. Busbar connections, cable terminals and grounding connections must be checked to ensure reliable electrical contact. For draw-out models, the connected, test and disconnected positions should be verified, and the operating mechanism should move smoothly. After installation, qualified personnel should perform insulation checks, mechanical opening and closing tests, auxiliary contact verification and electronic trip unit setting checks. Protection parameters must be coordinated with the actual electrical system before energization.
Q8: What are the common causes of unexpected tripping during MVS10N operation?
Unexpected tripping may result from sustained overloads, short circuits, incorrect protection settings, abnormal load conditions or electrical connection problems. When the current remains above the long-time protection threshold, the breaker may trip to prevent overheating. A sudden increase in fault current can activate instantaneous short-circuit protection. Loose busbar connections, excessive contact resistance and abnormal motor starting currents may also contribute to operational problems. During troubleshooting, technicians should first check the trip indication and identify which protection function has operated. They should then measure the actual load current, inspect electrical connections and verify the electronic trip unit settings. Any external electrical fault must be corrected before resetting the breaker. Repeatedly closing the circuit breaker without identifying the underlying cause should be avoided to prevent further equipment damage and electrical hazards.
Schneider MVS10N Contactor is in stock. Please contact us for a quick quote and competitive pricing.
| Company Information | ||||||||
| [email protected] | ||||||||
| Mobile | +8613666084105 | |||||||
| +8613666084105 | ||||||||
| 13666084105 | ||||||||
| Add to | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China | |||||||
Company Introduction
Xiamen Shengruite Trading Co., Ltd. is a company specializing in the supply of industrial PLC spare parts.
We provide high-quality PLC spare parts to customers in the global manufacturing, energy and power, chemical and other fields.
Since its establishment in 2011, after 13 years of rapid development, the cumulative global shipments have reached 223,650 pieces, with an annual output value of US$50 million.
Successfully served more than 500 customers in more than 100 countries and regions including Saudi Arabia, UAE, the United States, Europe, Africa, and Southeast Asia
Our Mission
Provide customers with the best quality PLC spare parts and the fastest delivery service to ensure that their industrial automation systems are always in the best operating condition.
We provide a 1-year warranty service, and we support returns and exchanges for any issues to ensure your rights and interests are fully protected.
We can provide detailed product images upon request, and our team can arrange warehouse photos for confirmation to ensure you have all the information you need before making a purchase.
Shipping times vary depending on your location. With the support of our 16 global warehouses, we strive to deliver orders as quickly as possible. Contact us to get an estimated delivery time for your specific location.
The minimum order quantity (MOQ) is typically one unit. However, for larger orders, please contact us for potential discounts and pricing details.
Yes, we offer competitive pricing for bulk purchases. Please reach out to our sales team with the specifics of your order to receive a custom quote.
We accept various payment methods for wholesale orders, including bank transfers (T/T), letters of credit, and other options upon agreement. For large transactions, please contact us directly for payment terms.
Yes, we offer flexible ordering options for both small and large quantities. Whether youre looking for a single unit or a large batch, we can accommodate your needs.
We occasionally offer promotional discounts for new wholesale customers. Contact us to learn more about any current offers available for first-time buyers.
If you are unsure of compatibility with your existing setup please provide your system details and our support team can verify compatibility prior to purchase.
Returns are accepted within 30 days if the product is unused, unopened, and in its original packaging. Please note that return shipping and associated costs are the buyer\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\’s responsibility.
Yes, we offer technical support for the installation and integration of our products. Our team can assist with setup, configuration, and troubleshooting to ensure a smooth installation.








